Richard Gibson: What Things Are Made Of

Mineral production up in 2011

2012-01-31T09:02:00.002-07:00

To the extent that mineral production reflects the economy, it looks like things were improving in 2011. The US Geological Survey released its 2012 Mineral Commodities Summaries, covering 2011, and most metals show significant increase in value.

Gold and copper are usually the leading metals by value produced in the US. In 2008, thanks to low gold prices, the copper industry yielded ore worth half again the value of gold: $9.4 billion vs. $6.7 billion for gold. Copper depends sensitively on the building industry, and with the recession in 2009, its value fell to $6.2 billion while gold held relatively steady at $6.4 billion.

In 2010, the copper business was worth $8.4 billion and gold was at $8.9 billion, but with continuing increases in gold’s price, in 2011 gold was valued at $12.2 billion, surpassing copper’s record value of $10 billion.

Other 2011 commodity business values include iron ore at $6 billion (triple the 2009-2010 amount) and the titanium dioxide industry, at $3.8 billion, surpassing its 2008 rate of $3.7 billion for the first time.

The most valuable non-fuel mineral commodity produced in the U.S. has been crushed stone, holding steady in 2009-2011 at $11 billion, more valuable than gold, copper, or any other metal, but gold took the lead in 2011 for the first time in recent years.

Despite the surge in value for gold produced in the U.S., the nation went from a net exporter of gold to a net importer in 2010-2011, with about 38% of consumption imported. Much of this was raw ore for processing. Copper imports have been fairly steady for the past 5 years at about one-third of total consumption (35% of our copper was imported in 2011).

Tin surging

2012-01-17T09:23:00.001-07:00

Cassiterides, north of Iberia--presumed source of early tin.

There’s quite a lot about tin in my book—it’s found on at least 10 pages, and in things as diverse as toothpaste and type metal. There have been some recent changes in some of the salient facts about tin.

Whether or not there’s a recession, according to information cited in this Bloomberg article, we’re about to see nearly 2 billion new cell phones a year. Combine that with more flat-screen TVs and computers, digital cameras, and other electronics, and consumption of tin (mostly for solder) is surging. In my book I quote recent USGS reports that 28% of all the tin used goes to electronics. The Bloomberg article indicates that that value is now more than 50%.

No more than a gram of tin per cell phone, but multiply it by two billion and it all adds up. Production increases (estimated at 0.6% for 2012) are not keeping up with demand increases, and the price of tin could climb in 2012 from around $9-$10 per pound in 2010 to as much as $13 per pound. And consumption is projected to exceed supply by more than 10,000 tons in 2012.

Where does the US get its tin? Apart from recycling and processing scrap, the US imports all its tin. There has been no primary mine production of tin in the US since 1993. Principal suppliers are Peru (more than half our imported tin), Bolivia, China, and Indonesia. China produces almost half the world’s tin, and Indonesia is #2 with almost one-fourth. In addition to electronics, there's tin in your car, in cans and containers (including glass and plastic ones--organotins reduce scratching in plastic), and in toothpaste (stannous fluoride -- stannum is Latin for tin, whose chemical symbol is Sn).

The map here shows an early map of Europe with the Cassiterides, imaginary islands that the Greeks thought to be the source of Phoenician tin. In reality, the tin came from Cornwall, in southwestern Britain. Cassiterite, tin oxide, is the primary ore of tin.

Public domain image from Wikipedia.

Soliciting input

2012-01-03T09:44:00.001-07:00

Obviously I haven't posted here in a while; I've been focused on a new book project unrelated to the topics of What Things Are Made Of. It's a book in The History Press' "Lost" series about buildings gone from Butte, Montana: information and blog here.

For What Things Are Made Of (this blog) I'm asking for input from readers: What would you like to see here? Either reply in the comments here, or send me an email at rigibson@earthlink.net with questions or ideas that you'd like to see addressed. Anything within the realm of resources - minerals, coal, oil, etc. - is fair game: geology, distribution, imports, uses, etc.

Thanks for your help and support.

Madagascar

2011-07-27T18:51:00.000-06:00

Tourmaline from Madagascar

It’s been a while since I posted. Trip to Kansas, and my dog died, and June-July are absolutely the busiest time for tourism in Butte (I drive the Chamber of Commerce Trolley and lead historic walking tours in one of my other lives).

This post is for another country: Madagascar. Government edicts and other problems can dramatically impact mineral production and trade, and the coup in Madagascar in 2009, combined with the worldwide recession, certainly did not help the mineral industry there. Madagascar had been the world’s leading sapphire producer – but in 2008, the government banned export of rough gemstones. Why would they do that? Because of one specimen, the Heaven’s Gift Emerald. A 536-kg (1,182-pound) emerald in matrix, it was declared a national treasure worth $150 million; the government said its exportation was illegal, although courts ruled otherwise, and the ban on all exports was instituted and continued until mid-2009. By 2010 the gem industry was recovering – led in volume by tourmaline at 43,000 kg produced in Madagascar (compare 2,100 kg of sapphires).

Madagascar produces nearly 3% of the world’s titanium mineral concentrates (mostly ilmenite) but that ranks it #11. Australia and South Africa are the leaders, and the primary import sources for the US, which is 81% dependent on imports. The titanium dioxide pigment industry in the US is valued at about $3 billion, about the 7th most valuable mineral commodity in the US. Titanium dioxide finds its way into products from white sidewall tires to playing cards to Oreo cookies.

Cobalt, nickel, and increasing chromite mining are expected to improve Madagascar’s role in global mineral supplies in the next few years. Vanadium, uranium, and zircon mining may also impact the industry on the island as those reserves begin to be developed.

Photo: Tourmaline from Madagascar, credit: Laurie Minor-Penland (Smithsonian Institution), under CC by 2.0 license.

Everyone has an agenda

2011-05-20T09:23:00.000-06:00

Everyone has an agenda. I do too, and because of my background as an oil explorationist it would be reasonable to think I might come down on the side of drilling, mining, and exploiting. Those things are important to modern life – but as a geologist, I also love the earth. I would call myself an environmentally sensitive resource explorer, even though some would say that’s an oxymoron.

In the introduction to What Things Are Made Of, I say the book is not intended to be a polemic against the mining industry – nor does it ignore the environmental consequences of mining. The point is that mined materials ARE used in incredible ways, and the book is a showcase for the necessity of mineral resources and the world's interdependence on their irregular distribution.

The National Mining Association promotes and lobbies for the mining industry. But they also have a great section, Minerals Make Life, whose message is essentially the same as mine: that everything takes minerals, that modern life would be impossible – not just inconvenient, but flat-out impossible – without them.

What eyes are made of

2011-05-08T16:10:00.003-06:00

As a geologist, I don’t get too much into biology (except for dead things – fossils). But given my early career analyzing kidney stones, I’ve been fascinated by biomineralization. So I was interested to learn of the first discovery of aragonite eyes.

Aragonite is the orthorhombic form of calcium carbonate, more familiar as calcite, the hexagonal (rhombohedral) type. Both are CaCO₃ but their crystal structures are quite different. There is a rare less stable third form, vaterite, that crystallizes in the hexagonal dihexagonal dipyramidal crystal class and is sometimes found in gallstones. But back to eyes.

The research linked above found that some chiton lenses consist of aragonite crystals. Acanthopleura granulate, the fuzzy chiton of the West Indies, is a primitive mollusk, nonetheless pretty successful in evolutionary terms: the chiton group got its start in Devonian time about 400,000,000 years ago. The West Indies version lives in intertidal zones – so maybe it should be no surprise that aragonite crystallography allows the chiton to focus light equally well through both water and air.

Modern animal lenses are biochemical compounds—proteins—that have evolved transparency. But early in earth’s history, other critters, including trilobites, developed single crystals of calcite as optical lenses. This evolutionary development might have been an important factor in the Cambrian Explosion, the time about 530 million years ago when all the major phyla developed in a geologically very short time. In the Blink of an Eye, by Andrew Parker, explores this idea in depth.

In the industrial world, aragonite sometimes finds uses in glass and cement making, but calcite, far more common, is generally used. Aragonite and calcite both make beautiful collectible mineral specimens.

Chiton photo by Kirt L. Onthank, via Wikipedia under Creative Commons Attribution-Share Alike 3.0 Unported license.

Why “Drill Baby Drill” doesn’t matter

2011-05-01T09:16:00.001-06:00

Here’s why drilling in the US (or almost anywhere else) today won’t make any difference to the price of gasoline this year, next year, or even the year after that – no matter what politicians may say.

It takes a long, long time to find oil fields. It takes a long, long time to develop them. It takes a long, long time to finally get some oil out. The most recent large example I’ve seen is the Hebron field, offshore Newfoundland. Discovered in 1981, ExxonMobil and others are about to develop it. They expect “first oil” in 2017.

Hebron contains an estimated 700 million barrels. The estimated cost to set up the field for production is $C 8.3 billion (US$8.75 billion), and the estimated cost of operations over the life of the field is an additional $C 5.8 billion (US$6.11 billion). I have not found an estimate for finding costs specific to this field, so I’ll start with the estimated US offshore cost (average for 2006-2009) of US$53 per barrel. That would put finding at 53x700 million = $37 billion. That amortizes all exploration expenses including failures, to make an average total cost for actual oil found. But offshore Newfoundland has a relatively low finding cost – and Exxon is a pretty efficient company, so the actual finding cost for Hebron is probably closer to US$7 per barrel, or around $5 billion. So there’s something like just under US $20 billion in costs.

Production rate will be something like 150,000 barrels a day. At $100 a barrel, that’s a whopping $15,000,000 every day. And about 1300 days – under 4 years – to repay the investment. Of course, things like corporate taxes, transportation to market, and so on come out of that, as well as dividends to shareholders. And obviously it could not happen without the huge up-front expenditures. And the patience and money to wait 36 years from discovery to first oil.

36 years is an unusual length, even for offshore oil fields. But 10-15 years is not.

At 150,000 barrels a day, the 700,000,000 barrels would take about 4700 days or 13 years to produce. But it won’t be at 150,000 barrels a day for the entire time – it will ramp up to that point, probably be managed to sustain a production plateau, and then decline. For comparison, Prudhoe Bay, North America’s largest oil field, reached a peak production level of about 1.6 million barrels a day in 1979. It’s still producing, but about 200,000 barrels a day and declining. ExxonMobil estimates Hebron’s productive (economic) life at 46 years, beginning in 2017.

The main point of this exercise is to illustrate that any major oil field discovered today will not impact the price of oil until it is actually produced – in 10, 15, or 36 years from now. When you consider the future, consider that almost all existing oil wells are declining in their production rates, like those in Prudhoe Bay. 525,000 oil wells in the US average about 10 barrels per day per well, and the estimated rate of decline in US production ranges from 3% to 7% per year. If it is 5%, 5% of 10 barrels is half a barrel a year – so in 10 years, on average, the 525,000 wells in the US today will have lost 5 barrels per day per well, so they’d be at 5 barrels a day rather than 10. We’ll have lost 2.5 million barrels a day. You’d need almost 17 Hebron fields to make up that loss.

The Hebron field is an extreme example, but the concepts apply to any large oil discovery in the United States – and large oil discoveries in the United States are very few and far between, and getting scarcer. Drilling or discovery today will have no impact on the price of gasoline for years to come.

Could another Guano War develop?

2011-04-19T09:11:00.000-06:00

A significant portion of Chapter 7 in What Things Are Made Of is devoted to phosphorus and phosphate rock, the building blocks of fertilizer and critical for life. The term “peak phosphorus” is only about four years old, but together with rare earths and lithium, global phosphorus supply is gaining mainstream attention.

While some research suggests phosphorus supplies could decline to problem levels by 2035, a recent analysis takes a different view. Either way, irregular distribution—one of the themes of my book—will probably impact phosphorus trade and use.

Phosphate rock ooids from Montana. Photo by Richard Gibson

In 2010, the U.S. imported 15% of its phosphate rock, the highest import dependency in history. The United States was a net exporter most years until about 1997, and imports were generally small until 2010, in part a reaction to the apparent ending of the global recession. All U.S. phosphate rock imports came from Morocco—the little country that owns or controls about three-quarters of the world’s reserves. Morocco and the U.S. produce about equal amounts, at 26 million tons per year (about 15% of world production each). China leads the world in phosphate rock mining with 37% of the total.

The mineral apatite, calcium phosphate, forms phosphate rock. Exactly how these deposits arise is still somewhat questionable, but upwelling ocean currents are thought to allow the chemical precipitation to occur. Other economic phosphate deposits are bird guano; islets off Peru covered with such material contributed to the “Guano War” in the 1860s. Whether demand for phosphate will lead to anything beyond trade wars remains to be seen.

Dumpster Day

2011-04-10T18:12:00.000-06:00

Saturday was Dumpster Day in Butte, Montana. It’s a day for recycling, sponsored by United Way, that comes every three months. And every three months the volume of stuff I generate appalls me. I alone threw away (well, saved for this day) four huge dog-food bags full of plastic, crushed to the extent possible, which is not much. Plastic dominates the piles I’ve been saving up, because paper, glass, steel, and aluminum are easier to take to the local recycling bins, which don’t accept plastic. All this plastic isn’t much by weight, but it sure is by volume.

Plastic is the hallmark of the Convenience Society. Easy to make, cheap, recyclable. It shows up in at least a dozen major sections of What Things Are Made Of. I get messages from people wanting to eliminate plastic as a way of saving oil. A nice idea, but not really valid. Plastic’s impact on the environment is a problem, but if we eliminated every bit of the plastic production in the US, it would be only a drop in the barrel of oil consumption.

One 42-gallon barrel of crude oil makes about 44 gallons of product, because during refining volumes increase. Of that final 44 gallons, 1.2 gallons make “feedstocks,” the chemical precursors to plastics, synthetic rubber, paints, petrochemicals, and more. That’s just under 3% of the products made from crude oil. Purists will add the energy cost to manufacture and distribute plastic products, which might get the total of oil consumption related to plastics up to 7%.

The point is that it’s just not that much volume. To conserve oil, forget plastic. A lot of it (such as grocery bags) is made from natural gas anyway, not oil. To conserve oil, drive less.

Bolivia: Lithium capital?

2011-04-06T20:27:00.002-06:00

I hope my April Fool’s Day post didn’t bother anyone! Today I thought I’d focus on one country: Bolivia. Bolivia has been in the news as the world’s largest supply of lithium, and increasing demand for lithium batteries in electric vehicles might mean the US will have to cozy up with a government that has not been exactly pro-US lately.

But wait. Bolivia doesn’t produce any lithium; the world production leaders are Chile and Australia, each with about a third of the world’s lithium, and China in third place with about 18%. Chile has half the world’s reserves and China has another quarter. Bolivia isn’t even on the list of producers or those with reserves. What’s up?

It’s the difference between resources and reserves. Reserves – what Chile and China have – are known, established deposits that can be mined economically with today’s technologies and at today’s prices. Resources are known, speculative, and possible deposits that might be producible sometime in the future. Huge lithium resources – a third of the world – are what Bolivia has (or may have).

Bolivia also has 6% of the world’s tin, 6% of the silver, 4% of the zinc, 2.5% of the lead, 2% of the antimony, 2% of tungsten, 1.5% of boron. Of all those, zinc is most valuable to Bolivians, contributing around $680 million a year to the national economy, more than silver ($610 million) and tin ($260 million). But Bolivia’s most valuable commodity is natural gas, accounting for most of the $880 million attributable to fuels.

The most important commodity imported by the US from Bolivia is tin. The US imports about 70% of its tin; the rest is not mined but is produced from recycled materials. Of 37,000 tons of tin imported by the US, 16% comes from Bolivia, placing it #2 as an import supplier after Peru, which supplies more than half the tin imported to the US.

Electrical applications use more than a quarter of our tin, well ahead of the #2 use in cans and containers.

Unobtanium comes into its own

2011-04-01T10:00:00.001-06:00

Unobtanium, a rare organo-metallic sulfide, now exists in adequate quantities to begin to see common, everyday uses. Its geologic occurrence, near volcanic flows in organic-rich subtropical environments, has limited its use to a few research labs. New devices are beginning to make use of its special properties.

Unobtanium replaces arsenic in integrated circuits, allowing arsenic to be used in more traditional ways. In the near term, this will likely double the cost of cell phones but predictions of increased demand will drive the price down within the next 35 years. Unobtanium goes pretty far: five ounces can make 765,453 cell phones.

Even pots and pans will benefit from unobtanium coatings, because of its remarkable heat transfer properties. In nature, this quality transmits volcanic heat into groundwater, creating hot springs. Processing unobtanium with irradiated fluorspar from China enhances the heat transfer and makes it stronger.

Only a few deposits are known that are rich enough for unobtanium to be mined as a primary product. Not surprisingly, most of these deposits are in China. The Wǒ zhèngzài zuò zhè jiàn shì deposit near the Mongolian border has yielded 67% of unobtanium produced to date. A low-grade deposit on the island of Jensaiqua in French Polynesia is being evaluated for its potential.

Soon most Americans will be importing yet another commodity upon which they will rely without even knowing about it. APRIL FOOL! :)

Gallium

2011-03-30T13:53:00.000-06:00

Gallium, named for France, comes to the US ironically from Germany, while the biggest proportion of imported germanium comes from Belgium. Both elements are byproducts yielded by refining other metals. Bauxite (aluminum's ore) and zinc processing are the main sources for gallium.

Why care? Most Americans own some gallium. Its biggest use - more than half - is in integrated circuits as gallium arsenide or gallium nitride, and it ends up in cell phones (especially "smartphones"), computers, back-lit flat-panel devices and televisions. Gallium also helps make lasers and solar cells.

The US imports more than 99% of its gallium, from Germany first, followed by Canada, China, and Ukraine. Demand and price are surging because of increasing manufacture of smartphones and flat-panel tech and also because of another important use of gallium: light-emitting diodes, LEDs. High-intensity LEDs are growing in volume, impacting demand for gallium. Its price has gone from $450 per kilogram in 2009 to $670 in 2010, and there's no limitation in sight.

Gallium finds its way to at least six pages in What Things Are Made Of.

State rankings

2011-03-22T20:34:00.000-06:00

Based on the search words, a fair number of people want to know what the most valuable mineral commodity is for individual states. The following list gives the top 25 states in terms of their contribution to total US non-fuel mineral production for 2010. The percentage of each state's mineral production of the total is given, followed by the mineral commodity that is most valuable in that state. Thus Nevada is #1 in the US, with 12% of the US total, and gold is the most valuable non-fuel mineral commodity in Nevada. Data from USGS.

1 Nevada (12% of US total) gold

2 Arizona (10%) copper

3 Utah (7%) copper

4 Minnesota (6%) iron ore

5 Alaska (5%) zinc

6 California (4%) sand and gravel

7 Texas (4%) crushed stone

8 Missouri (3%) cement

9 Florida (3%) phosphate rock

10 Michigan (3%) iron ore

11 Colorado (3%) molybdenum

12 Wyoming (3%) soda ash

13 Pennsylvania (2%) crushed stone

14 Georgia (2%) clays

15 New York (2%) salt

16 Idaho (2%) molybdenum

17 Montana (2%) copper

18 Ohio (2%) crushed stone

19 Kansas (2%) helium

20 New Mexico (2%) copper

21 Alabama (2%) crushed stone

22 Virginia (1.5%) crushed stone

23 Illinois (1%) crushed stone

24 North Carolina (1%) crushed stone

25 Indiana (1%) crushed stone

I'll list the second 25 in a future post.

What Things Are Made Of

2011-03-19T15:13:00.000-06:00

What Things Are Made Of is now available from Booklocker.com.

312 pages. The print-on-demand version is $17.95 + $3.00 shipping; the initial e-version (PDF) is available for $9.99. Additional e-formats in the works. It will probably be cheaper for you (and faster) for you to order through the publisher's site (link above).

Thanks for your support!

It's a book!

2011-03-17T11:50:00.000-06:00

I received the galley print from the publisher today. It looks like a book, feels like a book, smells like a book. It will probably be a few more days before it is "for sale" but of course I'll make a post about that, with links! viii + 295 pages.

A slight change

2011-03-04T14:05:00.000-07:00

Now that the book is about to become available - the publisher uploaded it to the printer today, for a check-print for me before it is actually for sale - I'm going to change my approach to the blog a bit.

I'll try to focus on updates, connections to things in the book that supplement and expand on it, and changes and news related to the topics in the book. It's a certainty that some aspects of the book will be out of date as soon as it is printed, because of the dramatic and speedy changes related to some materials. Rare earths come to mind: the demand, diverse uses, and global distribution of rare earths are in the news weekly if not daily. And there will likely be a bit more about oil and natural gas.

The blog and my web site will also become venues for interesting tables of information that I could not reasonably include in the book. And pictures!

Thanks for your interest. The book ought to be available for purchase by the end of March or possibly sooner. I'll post the link here instantly!

Alternatives

2011-02-24T08:01:00.000-07:00

I was going to take a break from going through the commodities list alphabetically to say something about oil, since the price surge due to worries about Libya and the wider region has tripled the visitor count to my oil pages to more than 1,600 visitors a day (up from a consistent average of about 600), but what I would have said has already been more succinctly written. It boils down to "use less," but the complete, good report can be read here.

What Things book: Another update

2011-02-18T12:51:00.001-07:00

The book is done and has been accepted by my print-on-demand publisher of choice. It will end up about 316 pages (6x9 paperback format) and will probably cost $17.95 for the printed version, which should be available in a few weeks. Details on electronic versions to come, but it will definitely be available in the Apple iBookstore.

Thanks to all for your interest and support!

Europium

2011-02-12T17:34:00.002-07:00

It’s a metal, not an earth, and more abundant in the earth’s crust than silver, gold, or iodine, but the rare-earth element europium is hard to come by. Like most rare earths, it forms few minerals and usually only occurs as traces within complex rare-earth carbonates and phosphates—minerals that rarely occur in economic concentrations.

Europium, discovered in 1890 and named for Europe, has been used mostly as the red phosphor in television tubes. Appropriately, paper euros include europium-based pigments as an anti-counterfeiting device. US postage stamps have used fluorescent europium as well, and it helps make some lasers and medical screening machines.

Like all the rare earths, europium comes mostly from Bayan Obo, China, the deposit that yields most of the world’s rare earths today. China’s largest rare-earth producer, Baotou Steel Rare-Earth (Group) Hi-tech Co., Ltd., had a 2008 capacity of 250,000 tons of rare earths. Only 120 tons was europium. Its price in 2008 was $1,200 per kilogram ($545 per pound), the third most expensive rare earth after lutetium and thulium.

Diamonds aren’t forever

2011-02-07T09:55:00.001-07:00

Wait—maybe they are. Industrial uses rather than gems consume most diamonds, and it’s those industrial applications I’m addressing here. About 55 million carats of natural industrial diamonds were mined in 2010, with Russia in a small lead over Congo (Kinshasa) for production. Together Russia and Congo mined more than half the world’s industrial diamonds.

Diamond in matrix. USGS photo.

In contrast, about 74 million carats of gem diamonds came to light in 2010, with Botswana in the lead and Russia at #2. But wait again—that’s more than the volume of industrial diamonds mentioned in the first paragraph. Right. Those were natural industrial diamonds, which account for only a little more than one percent of all diamonds. Synthetic diamonds dominate the industrial scene, and China produces more than 4 billion carats each year, far and away the world leader.

And guess what? China is the leading supplier of such diamonds to the US, and the US, as expected, is among the world’s greatest consumers of industrial diamonds. The US produces only about 127 million carats of industrial diamond, which sounds like a lot, but not in comparison to that 4-billion-carat gorilla, China. The US imports more than 500 million carats, 63% from China. The few natural industrial diamonds imported come from Africa, largely Botswana, but 93% of US industrial diamonds are synthetic.

Where do they go? Tiny dies for creating thin, light-bulb-filament wires, drill bits that find oil and gas, and computer chips all use industrial diamonds. But the vast majority go to a mundane use: stone and concrete cutting, mostly in the road-building and repair industry.

So as you motor down the highway, think about those Chinese synthetic diamonds. They helped find the oil to make the gasoline in your tank, and they help make the road beds upon which you drive.

Photo: Diamond in matrix. From USGS.

Cadmium: batteries, TVs, plastics

2011-01-30T09:08:00.000-07:00


Greenockite from Tsumeb, Namibia.

Nobody mines cadmium. It comes from metal refineries, mostly zinc processors, where it is recovered as a trace component. It’s toxic, and not much goes a long way—only about 228 tons in the US in 2009 (down from 700 tons in 2005), with nickel-cadmium batteries (NiCd) leading the way. As lithium ion batteries, with greater energy density, take over in many small devices, NiCd batteries have declined in use, but they may return as storage batteries for on-grid solar energy systems that store electricity during the day and make it available at night.

China produces about a quarter of the world’s cadmium, and while the US is a net exporter, it ranks #9 in world cadmium production with about 4% of the total. A lot of US cadmium is exported to Asia where batteries are made.

Cadmium’s minor uses include photovoltaic devices such as photocopiers, where cadmium sulfide coats drums. Traditional uses include yellow, orange, and red pigments: yellow no-passing stripes on highways once contained cadmium. It also stabilizes plastics, makes lasers, and in phosphors gave the bluish tint to black-and-white TV sets in the 1950s. Cadmium was also once a low-melting component of solder and Wood’s metal—an alloy of bismuth, lead, tin, and cadmium sometimes used in the fusible valves found in automatic sprinkler systems. Wood’s metal melts at 158°F; when fires reach that temperature, the metal melts to open the valve, allowing water to flow.

The only noteworthy cadmium mineral is greenockite, cadmium sulfide, which forms pretty honey-colored crystals shaped like hexagonal barrels.

Photo by Christian Rewitzer, via Wikipedia under creative commons license.

Barite helps find oil

2011-01-24T11:13:00.002-07:00

Barite roses from Kansas. R.I. Gibson photo.

Barite is a fairly common mineral, barium sulfate, frequently represented in collections. Its noticeably high specific gravity, 4.5, together with interesting crystals and occasional fluorescence make it popular with mineral collectors. Iron-bearing red sand incorporated into its crystalline aggregates makes barite roses, the state rock of Oklahoma. Gypsum crystals with sand in their matrix make similar “desert roses.”

From 2005 through 2008, the US consumed more than three million tons of barite each year. This volume fell to under two million in 2009 thanks to the recession and its impact on oil and gas consumption because 95% of all the barite used goes into drilling fluids for oil and gas wells. Barite’s density helps control high subsurface pressures.

Barite finds its way into many other uses, volumetrically smaller than oil and gas drilling but more directly pertinent to consumers. It helps protect metal in brake linings and adds gloss to automobile paint. Truck mud flaps, auto tires, home carpet backings, and playing cards include barite for weight, strength, and stiffness.

As a radiation blocker, barite shields x-ray machines and nuclear reactors, and creates the x-ray-opaque contrast medium for intestinal soft-tissue scans. A use that is declining as flat-panel technology expands is in the glass of cathode-ray tubes, where barium carbonate reduces radiation from old-style televisions and computer monitors.

About 80% of US barite is imported, virtually all of it (93%) from China, world leader with more than half the production (India is #2 with about 15%). The 20% of US consumption mined domestically is mostly from Nevada; the US industry employs about 330 workers in a $20 million business, representing about 7% of the world’s barite.

Photo: Barite roses from Kansas. Photo by Richard Gibson.

Arsenic

2011-01-12T10:09:00.001-07:00

Orpiment (arsenic sulfide)

Arsenic is Bad Stuff. It may have contributed to Napoleon’s death (accidentally or otherwise) and its presence in water supplies is an ongoing concern. For many years the wood treatment industry in the US consumed most of the arsenic used here, because it is an excellent preservative and insecticide. But toxicity issues led the industry to voluntarily cease using chromated copper arsenate for human-contact lumber like decks and picnic tables in 2003. Total US arsenic consumption has fallen from more than 30,000 metric tons in 1998 to 3,600 tons in 2009.

But arsenic finds its way into a lot of other critical but low-volume uses. It strengthens grids in lead-acid batteries, combines with other metals in some ammunition, and is a vital component of semiconductors in solar cells, circuit boards, and telecommunication electronics. Light-emitting diodes (LEDs) in computers, CD players, and numerous other household electronic devices contain gallium arsenide phosphide in tiny amounts. Two pounds of gallium arsenide can make 500,000 LEDs.

There are some arsenic ore minerals, mostly arsenic sulfides like lemon-yellow orpiment and red-orange realgar, but the primary ore is arsenopyrite, iron arsenic sulfide. It is also common in other minerals mined for elements like copper, and arsenic contributes significantly to environmental problems in copper-mining regions.

All US arsenic is imported. 86% of arsenic metal comes to the United States from China, which produces about half the world’s arsenic.

Orpiment photo from USGS via Wikipedia (public domain).

Sapphires

2011-01-07T09:22:00.005-07:00

I recently completed an article on Montana sapphires for Distinctly Montana Magazine, focused on beautiful gems from Yogo Gulch. But sapphires have practical uses too.

Because rubies (red) and sapphires (famously blue, but also pink, yellow, green, purple, and even colorless) are nothing more than corundum, aluminum oxide, with some interesting trace elements (mostly titanium and iron), they are very hard—number nine on the Mohs Hardness Scale, second only to diamond. Consequently they find their way into watch and clock bearings, and those that don’t make the cut as gems are sometimes used as high-quality abrasives.

The first lasers, in 1960, used synthetic rubies to focus light into a coherent beam. Solid-state integrated circuits sometimes use sapphires formed into small thin wafers as their insulating substrate. Larger sheets built from synthetic sapphire sometimes make tough windows in armored vehicles, as well as mundane surfaces such as grocery-store barcode scanners where scratch resistance is valued. High quality watches may have sapphire crystal faces in addition to gem-like bearings inside.

Even though Auguste Verneuil invented a process for making synthetic sapphires in 1902, natural sapphires were used for non-jewel applications for decades after that. Today about 250 tons of synthetic sapphires supply the world annually with watch bearings, abrasives, and specialty uses. The US and Russia manufacture most synthetic stones, while Madagascar is the leading gem sapphire producer.

Watch for the article on Montana’s Yogo sapphires in the Summer issue of Distinctly Montana.

Image: The 182-carat Star of Bombay star sapphire, via Wikipedia.

Sandstone facades

2010-11-08T08:22:00.001-07:00

Buildings are built of many things. What Things Are Made Of has one chapter about simple home construction and another including monuments and office buildings. I’m involved in planning for the Butte-Silver Bow Courthouse Centennial, coming up in 2012. It’s a huge Beaux-Arts creation whose cost was comparable to that of the Montana State Capitol in Helena.

The first floor façade’s rectangular panels boast uniform, fine-grained gray sandstone. A close look (or better, a careful look from a certain distance) reveals the sandstone’s beds to be angular, curved—not the expected planar laminations. The arrangement is called cross-bedding, crosscutting layering that means the sand was deposited in active rivers. The beds are essentially little sand dunes, channels, and other river-bed forms carved by flowing water.

The sand solidified into sandstone about 78 million years ago near what is now Columbus, Montana. Quarrying there began about 1890. Under the leadership of stonemason Michael Jacobs, born Jacobucci in Italy, the Montana Sandstone Company provided facing stone to numerous buildings in Butte, but it was the contract for the Montana State Capitol that put the company on the map and established Jacobs’ fame and fortune.

Today, stone decorating buildings is called dimension stone, and 78% of that used in U.S. construction is imported, with Brazil, Italy, China, and Turkey supplying nearly equal amounts. Brazil, China, and Italy provide mostly granite and Italy is also a major source of marble. Imported stone was worth $1.5 billion in 2009, compared to $377 million for domestic products. The U.S. is the largest consumer of these materials in the world.

What Things book: Update

2010-10-27T08:20:00.000-06:00

For the three or four of you who are chomping at the bit for What Things Are Made Of to come out, here’s a quick update. It’s almost done. 92,000 words, about 320 pages laid out as a 6x9 paperback. I still have to complete the references, index, and one annoying section in Chapter 7. Then I have to evaluate print-on-demand shops and figure out e-pub formats and make some decisions. I’m anticipating January or February 2011 for an availability date.

Thanks for the interest and support!

Manganese from Gabon

2010-10-08T08:54:00.000-06:00

And we’re back… it was a busy and complicated summer and I’ve spent a LOT of time actually working on and thinking about What Things Are Made Of. The book is now at just over 80,000 words, with 8 chapters finished (two need some expansion and tweaking, and a summary chapter yet to complete). I'm looking at print-on-demand and E-book for actual publication.

I learned an interesting tidbit about manganese, a metal the U.S. uses mostly in steel alloys and imports at a rate of 100%. Our primary supplier is little Gabon, with 57% of our manganese ore imports. Gabon’s manganese is associated with a pretty cool location – the only natural nuclear reactor known on earth.

A little over two billion years ago fissionable uranium isotope U235 was more abundant in uranium deposits, at nearly three percent, than it can be today simply because over those two billion years most of it has decayed to lead. Evidently critical mass was reached in a uranium deposit back then, and nuclear reactions happened. It’s not perfectly clear why the manganese is associated, but it’s enough to make manganese Gabon’s second most valuable export. $100,000,000 worth came to the US in 2009 – but that pales in comparison to Gabon’s oil exports to the US, valued at $2,200,000,000, twenty-two times the manganese value.

Manganese steel is critical in construction, so the late 2000s recession has taken a toll. US manganese consumption in 2009 was a third of its use in 2006, but it is still a half-billion-dollar business in the United States.

A brief introduction to fireworks

2010-07-04T08:55:00.001-06:00

Like gunpowder, fireworks are mostly sulfur, saltpeter and carbon but with diverse agents added for color. They originated in China about 1000 years ago as a variation on black powder. April 18 commemorates the invention of firecrackers by Li Tian, a Chinese monk who lived near Liu Yang in Hunan Province, the region that supplies most of the world’s fireworks to this day.

Strontium carbonate (red) and barium chloride (green) tint modern skyrockets and other fireworks. Lighter red may come from lithium carbonate with orange provided by calcium chloride. Blues usually indicate the presence of copper compounds, which also produce purple when mixed with strontium. Rarely, rubidium generates purple. Sodium makes yellow, iron makes gold. Burning titanium, aluminum, or magnesium metal powder is the basis for intense white or silver stars. Strontium also makes red color in highway flares.

More information here.

Photo in public domain, via Wikipedia

Earthenware or stoneware?

2010-06-26T08:44:00.000-06:00

My apologies for no posts. I’ve been busy doing walking tours, driving the Butte Chamber trolley, and working on a booklet and exhibit for artifacts from the 2007 Butte Chinatown archaeological dig. The dig unearthed pieces of opium pipes, some of which are earthenware and some are stoneware. Today’s post focuses on differences in those two types of ceramic.

Both earthenware and stoneware are essentially fired clay, though proportions of components vary widely. Stoneware is usually fired at higher temperatures (up to 1300º C vs. temperatures more in the range of 1000º C for earthenware), which gives it a denser, more vitreous texture.

At the heart of such ceramics are clays—fine-grained sheet silicates similar to mica. Their structures can incorporate water, and when fired, such clays effectively collapse into denser structures, or even metamorphose (change form) into other, denser minerals. Ball clay, so named because historically 35-pound cubes of clay became rounded during shipping, is a common constituent. It is usually mixed with varying amounts of kaolin (another clay mineral), quartz, and feldspar to make ceramics.

In the United States, Pennsylvania was a historical major producer of ball clays. In Europe, Devonshire, England was an important source. Today, 63% of U.S. ball clay production comes from Tennessee.

Ceramic earthenware and stoneware such as dishes and bowls is a tiny volume of all clay consumed. Most ball clay in the U.S. serves as fillers and plasticizers in floor and wall tiles, and in the ceramics that become toilets and sinks.

The clay industry in the United States is a $1.4-billion business employing about 5400 workers in 41 states.

Photo of opium pipe from Butte Chinatown archaeological dig courtesy of Mitzi Rossillon.

The oil leak

2010-05-28T08:25:00.001-06:00

Current (late May 2010) estimates of the rate of leakage in the Gulf of Mexico well are 12,000 to 19,000 barrels a day. Pretty bad, and significantly worse than early estimates.

With total U.S. oil consumption at 19,714,000 barrels a day (May 21, 2010), the leak at 15,000 barrels per day would take 1,314 days (more than 3½ years) to equal one single day of U.S. oil consumption.

The point is not to belittle the disaster—it's an awful thing—but rather to point out the gargantuan scale of U.S. oil consumption.

Offshore oil

2010-05-11T10:30:00.000-06:00

In the wake of the disastrous oil leak in the Gulf of Mexico, visitation to my website’s oil pages has spiked to over 1000 unique visitors a day, as it does when the price goes up or hurricanes or wars interrupt our guzzling. There is plenty of information out there, so I see no need for me to expound on much about the problem. But I need to address one issue, the demand from some that we put an end to offshore drilling and production because it is so dangerous.

I’m as much or more of an “environmentalist” as many are. Most geologists are, because they love the earth. That does not mean we reject the value of earth products, whether oil or copper or neodymium. But those who would eliminate offshore oil exploration and production need to realize one thing.

More than a third (37% in December 2009) of U.S. domestic oil production comes from offshore wells.

Federal offshore areas (mostly in the Gulf of Mexico) produce more oil than any state. More than Texas, more than Louisiana, more than Alaska. More than 2,000,000 barrels a day in December 2009. Shut it off – and replace it how? There is no replacement source that can be tapped economically, if at all. By the time any new discoveries come onstream, in seven to 15 years from now, existing production will have declined by that much or more: we will only maintain the status quo if (IF) we discover and develop that much production. The only significant possible locations for those high-volume discoveries are offshore, and there is no guarantee that it exists at all.

To quote a fine summary (available here), “America simply doesn’t get it.”

Public domain image of offshore platform. Credit: NASA.

The kitchen floor

2010-05-07T10:16:00.000-06:00

Last night I went to a Butte history talk focusing on home furnishings about 1910. Among the multitude of state-of-the-art items anyone could buy at Butte’s Hennessey’s store using the newly invented time payment plan (a.k.a. credit) was linoleum flooring.

Invented in England in the late 1850s, linoleum's basis was solidified linseed oil derived from flax plants. It gave a tough but flexible material. Minerals extend and improve the properties: finely ground limestone or whiting may comprise a third of linoleum’s volume while clays add flexibility and also serve as extenders or fillers. Various other additives—sawdust, gum, pine rosin—also help give linoleum its desirable properties.

An unusual mineral, wollastonite, calcium silicate, crystallizes as tiny elongate needles or blades. This geometry helps bind other materials together, and as tough little bars, wollastonite makes linoleum stronger while maintaining its flexibility. It’s a chemically stable mineral that helps linoleum resist chemical attack and cracking over a wider temperature range than wollastonite-free material.

Although wollastonite deposits were exploited in Inyo, Kern, and Riverside Counties, California, from 1930 to 1970, the largest wollastonite mines in the U.S. are in Essex County, New York, in billion-year-old rocks of the Adirondack Mountains. The ore is processed at Willsboro, and together with another mine in Lewis County makes wollastonite New York’s fifth most valuable non-fuel mineral product. Almost all U.S. wollastonite production today comes from New York, adding up to about a quarter of all produced in the world. That ranks the U.S. at #3 for wollastonite, following China and India which together account for about 70% of world production.

Thanks to the New York mines, the U.S. is largely self-sufficient in wollastonite production, with something like 5% of consumption imported. India is the leading source of those imports, but China, Canada, Germany, Finland, Japan, and France also ship small volumes to the U.S.

Wollastonite finds its way into ceramics, metallurgy, paint, plastics, caulking compounds, friction products such as auto clutches and brakes, and synthetic rubber including auto tires.

Much “linoleum” today is really polyvinyl chloride, made from natural gas and salt. Although Frederick Walton patented his linoleum-making process in 1860, he failed to trademark the name and lost lawsuits alleging others who used the word infringed on his trademark. Consequently, “linoleum” is considered the first product name to evolve into a generic term—and it happened just 14 years after its introduction.

Wollastonite specimen image from U.S. Geological Survey via Wikipedia.

Say – can you see?

2010-05-02T10:16:00.000-06:00

An alchemist’s cabinet could have been the resource for modern eyeglass manufacture. The lenses contain a wealth of trace elements to improve their optical properties, from lanthanum (a rare earth, most of it mined in China today) to improve the refractive index and reduce color dispersion, to silver chloride or silver bromide in photochromic lenses that darken when exposed to ultraviolet light (UV).

Cerium, titanium, neodymium, and manganese in glass all help absorb harmful UV rays. Coloring and the non-reflective surface on sunglasses may contain erbium, one of the four rare-earth elements named for Ytterby, Sweden.

As with most glass, the fundamental component is high-purity silica, SiO₂ – quartz, the most common mineral in the earth’s crust. Plastic lenses are polycarbonate petroleum derivatives. Such plastics may also form the frames and earpieces, but the nose pads are softer plastic, often rubber-like silicones. Silicones are complex organic-silica compounds typically synthesized from methyl chloride (usually derived ultimately from natural gas or petroleum, and salt (NaCl) to give the chlorine) in the presence of copper as a catalyst.

Metal frames, usually some alloy of steel, can include aluminum, magnesium, titanium, and other elements added for tensile strength, light weight, and other properties. Nickel or chromium coatings give varied appearances as well as corrosion protection. “Memory metal,” which springs back to its original shape after flexing, is one of several copper-zinc-aluminum-nickel or nickel-titanium alloys.

The inventor of the first eyeglasses is unknown, but early Renaissance Italy, a hotbed of innovation, is the likely location where some lucky resident wore the first spectacles. Old manuscripts suggest that convex lenses – barely more than frame-mounted magnifying glasses – began to correct farsightedness in the late 1200s; not until 1451 did Nicholas of Cusa, a German Catholic bishop, learn how to use concave lenses to combat nearsightedness. Benjamin Franklin invented bifocals in 1784, and George Airy’s astigmatic lenses provided correction for the last of the major eye focusing problems in 1825, a decade before Airy was appointed Britain’s Astronomer Royal.

George Airy (1801-1892) is better known (at least among geophysicists like me) for his determination of the earth’s mean density when he was only in his 20s. His pendulum experiments led to the Airy Hypothesis of isostasy, which says that mountain ranges must have root structures of lower density than the surrounding rock, proportional to their height.

Image: The 'Glasses Apostle' in the altarpiece of the church of Bad Wildungen, Germany. Painted by Conrad von Soest in 1403, the 'Glasses Apostle' is considered the oldest depiction of eyeglasses north of the Alps. Image in public domain via Wikipedia.

Let’s play gossip

2010-04-29T12:59:00.000-06:00

You remember the game—you whisper something to your neighbor, who whispers to the next person and so on around the room, until something incredibly different gets back to you. I see the Internet as one big game of gossip.

You’d think people could search around until they figured out the “truth,” whatever that may be. But it seems that many just latch onto the story of the moment, take a few highlights, add some embellishment, and pass it on.

A simple example comes from the questions I get through the Oil Statistics pages of my web site. It’s astonishing how many people ask whether or not it’s true that all of Alaska’s oil is exported to the Far East. And more astonishing how many, after I point out the answer with reliable sources, tell me I have to be lying and that I’m part of the conspiracy.

In 1996, when oil cost $12 a barrel and there was a glut of the stuff on the West Coast—refineries couldn’t handle it all—a law was passed allowing Alaskan oil to be exported. At a maximum of 7% of production. For four years, some oil was shipped to Japan, South Korea, and China. Only rarely was as much as 7% exported—the most was about 80,000 barrels per day when the US was consuming 19,000,000 barrels per day and Alaska was producing around 1,300,000 barrels per day.

In 2000, with prices up and the glut in West Coast refineries relieved, the State of Alaska and oil companies voluntarily ceased the exports, and since then every drop of Alaskan crude has gone to US refineries. But you’d be amazed how many people flat-out will not believe that.

More information and links are available on my Alaska Oil page.

Alaska Pipeline photo from US Geological Survey.

My t-shirt

2010-04-21T11:57:00.003-06:00

My t-shirt reads “If it can’t be grown, it has to be mined.” And while that’s a mantra of the mining industry, it’s also completely true.

This particular shirt is 100% cotton, and “Hecho en Mexico.” For a future post, I’ll write about 50-50 blends of cotton and polyester, but for now I want to address the mineral underpinnings of this cotton, something that is grown.

Even things that are grown require minerals. Think soil and fertilizer and pesticides. Yes, I know there is a small and growing movement toward “organic agriculture,” including cotton farming, but it is tiny compared to the industrial scale of most textile crops. World-wide, 25% of all chemical pesticides and fertilizers contribute to cotton’s growth.

China is the world’s largest cotton grower, but the U.S. is the #1 cotton exporter. China is our #1 customer, with Turkey and Mexico next in line. Mexico relies on the US as its greatest supplier of cotton. So although my shirt is hecho (assembled, sewed) in Mexico, at least some of the cotton probably came from fields in Texas or California. Just as you can’t boycott Arab oil by boycotting any (and I really mean almost any) U.S. gas station, you can’t “buy American” simply by avoiding a product “made” elsewhere. Cotton farmers, potash miners, natural gas producers in the U.S. have all contributed to my “Made in Mexico” t-shirt.

Ninety percent of the cost of nitrogen fertilizer is in the cost of the natural gas that becomes ammonia and ultimately the nitrogen component. Some comes from coal, but natural gas, mostly from the U.S., is the feedstock for most of it. Potash, another mineral vital in fertilizers (the source for potassium) is mined in New Mexico and extracted from brines in Utah and Michigan, adding up to a 686-million-dollar business employing more than 1,000 workers. But the U.S. fertilizer industry is so big we also import 73% of more than three million tons of potash each year. Most of it comes from Canada, but Belarus supplies about 5% of our potash imports.

Pesticides have a well-deserved negative reputation. They are, after all, killers, and they have negatively impacted humans and beneficial animals and plants as well as pests. Whole books and advertising campaigns champion and condemn their value and their evil. For now, suffice it to say that they are ultimately made from chemicals derived from minerals, from oil and natural gas to arsenic and chlorine. And love them or hate them, they are used in agriculture on a huge scale world-wide.

Farming of course requires other mineral-based equipment and supplies, from tractors and their fuel to water-supply systems. My primary point in this post is to highlight the extreme interdependency on a global scale of the things we take for granted. And to point out that a label like “Made in Mexico” or “Made in USA” isn’t a black-or-white statement.

My t-shirt’s imprint boasts at least six colorful dyes. I’ve posted previously about the deep blue color ultramarine, and again the topic of mineral pigments fills more than one book. That’s enough for now.

Photo by Lady von Gaga-Gaza.

Does the US import everything? Not quite!

2010-04-18T10:05:00.001-06:00

It seems I’m always focused on the United States’ dependency on foreign imports for most everything, and to tell the truth, increasing that awareness is an important motivation for What Things Are Made Of. But what about the other way around? What raw mineral commodities does the U.S. export?

Not too many, but U.S. mineral exports are important and valuable.

For example, the U.S. is a net exporter of gold. In 2008, the U.S. was the world’s #2 gold producer, behind China, but in 2009 China expanded its lead and the U.S. was tied in third place, lagging Australia (barely) and on a par with South Africa. World production shares for gold are given below for 2009:

China – 13%
Australia – 9%
South Africa – 8.9%
USA – 8.9%
Russia – 7.9%
Peru – 7.7%

The gold mining and milling industry employs nearly 10,000 workers in the U.S., mostly in Alaska and Nevada, yielding mine product worth about $6.4 billion.

What about oil? Yes, the world’s largest consumer (18,520,000 barrels a day in January 2010) does export crude oil. 33,000 barrels (under two-tenths of one percent of consumption) every day in January. I hear the outrage: we need every drop, prices are too high already, companies are screwing us. But consider: all that exported crude goes to Canadian refineries, typically those nearer the producing fields than US refineries. And virtually every drop comes back to the U.S. as imported gasoline. It would in all likelihood cost more to ship the oil from a remote North Dakota field to a refinery in Texas than across the border to Canada. And to repeat something that needs repeating, not one drop of Alaska crude goes to the Far East or any nation other than the U.S. At most, from 1996-2000, 7% of Alaska’s crude was exported.

Nearly half the U.S. output of soda ash is exported, half of a $1.4-billion-a-year industry centered on southwest Wyoming. A vital component of glass manufacture, soda ash also finds its way to soaps and many chemicals, but its role in glass makes the business sensitive to housing and automobile manufacture; consequently production dipped a bit in 2009. But the U.S. remains the 600-pound gorilla of soda ash, with 93% of the planet’s natural product yield and 96% of estimated world reserves, all thanks to an unusual deposit of the mineral trona, laid down in a huge Wyoming lake about 45,000,000 years ago.

Other commodities that the U.S. exports include molybdenum, boron, helium, diatomite, and zirconium.

Gold crystals photo from Wikipedia, licensed under the Creative Commons Attribution-Share Alike 3.0 Germany license.

Prices

2010-04-13T09:47:00.001-06:00

Prices of mineral commodities, like those of most things, vary over time according to supply and demand and natural and geopolitcal events that artificially inflate or deflate prices. Tariffs and government regulations can impact prices too, as can market speculators.

Copper’s price has been driven in recent decades mostly by the rate of building construction in the biggest consumers – the US for all of the 20th Century, and China since 2002. Half the copper used in the US goes to building construction. During the 1990s, copper’s average price for the year ranged from a high of $1.38/lb in 1995 to a low of 76¢ a pound in 1999. It remained below $1.00 per pound until 2004; in 2006, the price nearly doubled to an average of $3.15/lb and has remained above $3.00/lb on average every year since then (except 2009, at $2.37). Copper was near or above $4.00/lb briefly in 2006 and again in 2008. A general upward trend in 2010, to more than $3.50 now, may signify an improving economy – or at least a perception of one in the markets.

Neodymium, critical in many applications but in rather low quantities, was around $6/kilogram (2.2 kg/lb) in 2003 but as demand increased (for magnets in electric motors for cars and windmills, among other things), the price reached $60/kg in 2007 and has been in the $40-$46 range since then.

Indium, an important component of thin films in liquid crystal displays and flat-panel TVs and computer screens, ranged in average annual price from $120 to $375 per kilogram from 1991 to 2001, and reached a low in 2002 at $60/kilo. As technology improved and we began to buy more and more flat-panel products, indium’s price climbed dramatically in the 2000s — $176/kg in 2003, $643 (2004), $961 (2005), $815 (2006), $637 (2007), $519 (2008) and $390 in 2009 as economic problems reduced its consumption. In April 2010, indium was at about $625/kg. Indium is three times more abundant in the earth’s crust than silver, but it forms few minerals and almost never in economic concentrations. The 600 tons per year produced on earth come mostly as byproducts of zinc mining; half the world production comes from China.

Even a common commodity like rock salt shows price fluctuations. From 1991 to 2003, its price hovered between $19/ton and $23/ton. Since 2004 the price has climbed steadily, to $35/ton in 2009. In the same time frame, US imports of salt nearly doubled, from 11% in 1991 to 20% in 2008-09. The biggest consumer of salt is the highway deicing business (43% of consumption), with the chemical industry in second place (35%).

When you compare prices, be aware that different materials may be priced differently. It could be pure metal, or a metal oxide, or a metal concentrate that’s priced, but all under the heading of cobalt (or whatever).

Image from Wikivisual under the terms of the GNU Free Documentation License.

Coal: chemical gold

2010-04-08T13:34:00.000-06:00

Coal has been in the news lately, with a deadly explosion in a West Virginia coal mine and a near-disaster at another mine in China. Leaving aside the dangers, both human and environmental, what is coal used for?

Most people will be aware that about half the electricity in the U.S. is generated by burning coal (world-wide, the figure is about 40%). Burning coal has been used historically to create steam for locomotives, ships, and machinery, and as a direct fuel for heating homes and businesses. I’ll focus on more obscure, non-fuel uses.

One use that is not really obscure, but involves burning coal, is steel manufacture. Coke, coal that has been baked to drive off volatiles, is the main fuel for steel blast furnaces.

Diverse chemicals derive directly or indirectly from coal. Coal tars are residual by-products of coal gasification. Coal gas was used for city street lighting in the decades before electric lights became common. Coal tar chemicals led to the development of some insecticides, paint thinners, and moth balls, as well as mauve and other synthetic dyes (see Mauve: How One Man Invented a Color That Changed the World, by Simon Garfield, a good read) including the color in the 1882 stamp seen here.

Coal tar chemicals yield both aspirin and the plastic bottle containing the medication. Fertilizer, smelling salts, and baking powder have a chemical heritage in the ammonia derived from the coking process. Soap, nylon, and synthetic rubber in car tires have coal-derived components.

Activated charcoal filters, from air cleaners to kidney dialysis machines, are made from coal. TNT explosives and perfumes have coal in their pasts.

The United States owns the greatest coal reserves in the world, at 27% of the total (Russia is #2 at 17%), but China is the world production leader with almost 40% (U.S. is #2 at 17%). China’s industrialization means it exports less and less coal, using most of it internally as the world’s largest coal consumer, with the consequence that Australia is the leading coal exporter, at about a third of the world total (and Indonesia is the #2 exporter, with 13%).

Pandemonium rules

2010-04-05T14:54:00.001-06:00

If you’re like many Americans, you probably think your home and life represent marginally controlled pandemonium, sometimes verging on delirium. But if you operate a safe home, you may well have some useful pandemonium and not even know it.

Pandemonium and delirium were the working names for radioactive Elements 95 and 96, synthesized in 1944 by Glenn Seaborg, Albert Ghiorso, and Ralph A. James during the Manhattan Project to unleash the power of the atom. Radioactive plutonium decays by emitting beta particles to form Element 95 – now called americium – and Element 96, curium.

Americium, named for the Americas, occupies a tiny wafer in ionization-type smoke detectors. A fraction of a gram of radioactive americium metal, rolled with gold to form a thin foil, is sandwiched in a silver-palladium pellet. Alpha particles emitted by the americium are big and can’t travel very far. They ionize the air in a small chamber, and the ions set up a small current between two plates connected to a battery or electrical source. When smoke enters the chamber, the ions are attracted to smoke particles rather than the electrical terminals, so the current measured is less than normal. Once the current falls beneath a pre-set threshold, the smoke alarm goes off, and pandemonium follows.

Most americium production comes from nuclear facilities, where it is a by-product of plutonium reactions. One such facility, Los Alamos National Lab, recently put out a call for commercial partners to work with them in marketing and distributing the element.

Radioactivity in your smoke detector is not dangerous. As noted above, the particles can’t travel beyond the chamber in which they form. It would not be a good idea to eat your smoke detector, however.

Smoke detectors have been suggested by the paranoid as targets for terrorists who would use the americium to make nuclear explosives. There’s only about 0.00000029 gram in each smoke detector, and it takes around 80 kilograms to attain critical mass to explode, so it would take a LOT of smoke detectors – likely, most of those in existence, or more – to make an explosive. Don’t lose any sleep over it.

The photo via Wikipedia is licensed under the Creative Commons Attribution-Share Alike 2.0 Generic license

Jargon

2010-03-31T16:55:00.001-06:00

Today I take my text from Charles B. Hunt, US Geological Survey geologist mapping the Henry Mountains in southern Utah in the 1950s.

"A cactolith is a quasihorizontal chonolith composed of anastomosing ductoliths whose distal ends curl like a harpolith, thin like a sphenolith, or bulge discordantly like an akmolith or ethmolith."

In the 1950s US Geological Survey publications were intensively reviewed for style and accuracy, so it’s a minor miracle that the definition got published. This was Hunt’s way of poking fun at the proliferation of –lith words for various rock bodies (the suffix derives from Greek lithos, stone). The definition has a cult following among geologists – I love to roll it off my tongue at parties, where people then stare at me with more than the usual concerned look – so much so that when it was removed from the Glossary of Geology, the hue and cry was such that it returned to future editions, where it remains to this day.

All scientists, all specialists, have their own argot, jargon, and particular terminology that tends to exclude the uninitiated from their secret club. At this stage in my career, one important motivation for me to write What Things Are Made Of is to try to open those secret doors to give non-scientists a look at geoscience. Whether I succeed or not can be argued, but I am trying. Will I be the next Simon Winchester (The Map that Changed the World, Krakatoa) or John McPhee (Annals of the Former World)? I’d be the last to compare myself to them, but they give me a clear target for lucid writing to which I aspire.

Fragments of the starry firmament

2010-03-27T13:27:00.002-06:00

Early residents of Afghanistan mined the rock lapis lazuli more than 6,000 years ago for jewelry, including the famous gold mask of Tutankhamen. By the 6th Century AD they began to produce the deep blue pigment now known as ultramarine. They used it in cave paintings; its use spread to China and India, and eventually to Europe by about 1100 AD.

Grinding the blue rock, mixing it with waxes and oils, and processing in a lye solution yielded natural ultramarine pigment.

Lapis lazuli’s rarity made for notable expense (greater than gold) in making ultramarine pigment. In European monasteries, highest quality ultramarine was used only on the most important, prestigious artworks, for the robes of Mary and the Christ child. By the 1820s, a synthetic version was devised, and reliance on Afghan sources, the most significant in the world, waned.

The rock lapis lazuli contains multiple minerals, with the blue color coming mostly from two complex sodium-calcium aluminosilicates, lazurite and sodalite.

Even after synthetic dyes became the rage in the 1850s and 1860s, the natural material still served special purposes such as printing postage stamps. Stamp collectors who own blue-tinted U.S. postage stamps from the 1860s (such as the 3¢ ultramarine locomotive in the 1869 pictorial issue) probably have some microscopic bits of Afghan lapis lazuli.

The word ultramarine means “beyond the sea,” whence came lapis to Europe. Pliny the Elder gave the beautiful stone a more admiring description, calling it “a fragment of the starry firmament.”

Photo of polished slab of lapis lazuli, from Wikipedia under the Creative Commons Attribution ShareAlike 3.0 License

More about neodymium

2010-03-23T10:17:00.001-06:00

One of the most common search words used by people who end up here is neodymium, the rare-earth element critical to powerful magnets in applications such as electric cars, wind turbines, and MRI machines. So I decided to write a bit more about rare earths and their worldwide occurrence.

Although rare earths are actually moderately common in the earth's crust, economic concentrations are indeed quire rare.

The Bayan Obo deposit in northern China, about 100 km from the Mongolian border, is presently the most productive mine complex for all rare earths. China produces 97% of the world's rare earths. Two North American deposits have recently attracted attention, because Americans are increasingly aware of our use and dependency on China for these elements (averaging 91% of U.S. imports), and because the price for some of the 17 rare earths is approaching levels to make mining them here economic once again.

The mine at Mountain Pass, in California’s Mojave Desert, was the largest rare-earth producer in the world until the 1990s when China took over. Molycorp, owner of the deposit there, has been processing accumulated ores for a couple years, although the mine itself has not reopened. And for final processing, they must ship their product to—you guessed it—China, the site of the only separation plant. Constructing one in the U.S. would be a huge investment, one nobody is presently willing to undertake.

Another promising undeveloped rare-earth deposit lies along and adjacent to the Continental Divide between Montana and Idaho, centered on the Lemhi Pass area. Two sites are held by U.S. Rare Earths, Inc., a private company.

The Idaho deposits were discovered and initially investigated in the late 1940s and 1950s because they held radioactive thorium, important in nuclear weapons development. The geologic setting is complex: igneous (formerly molten) rock bodies that were once thought to be part of the Idaho Batholith (around 100 million years ago, but with a wide range of dates) are now considered to be Mesoproterozoic (something like 1300 million years ago) in age, and to have metamorphosed (changed by heat and pressure) the surrounding rocks of somewhat older age. Sedimentary rocks of the Gunsight and Apple Creek Formations became quartzites and gneisses thanks to that metamorphic cooking. They also became the host rocks for the veins containing rare earths, gold, and other minerals.

The whole area is complicated further by thrusting – faulting, breaking rocks, by pushing older layers up and over younger layers, sometimes on scales of tens of kilometers or more, something that probably happened over tens of millions of years around 60-70 million years ago. Then, about 40 or 50 million years ago, Nature put a pile of volcanic rocks on top of the whole mess.

With all that going on, you can imagine that geologists are still working out the details, and what I write above is just a broad-brush overview. Some of the basic geologic mapping by U.S. Geological Survey, Idaho Geological Survey, and other scientists was published only a few years ago. It is not completely clear (at least not to me) when the valuable minerals came in—some indications say it was associated with the early metamorphic cooking, some suggest later. But the high grade of the ore at Lemhi Pass and near Salmon, Idaho, is clear, making the two sites perhaps the highest potential in the U.S. as undeveloped rare-earth resources.

Exploration and economic evaluation is underway for two other isolated rare-earth deposits, one near Sundance, Wyoming, and one beneath 600 feet of rock in southeastern Nebraska. Another potentially important North American rare-earth deposit is being investigated at Thor Lake, north of Yellowknife, Northwest Territories, Canada. We’ll save these possibilities for another post.

Mineral riches: why here and not there?

2010-03-19T08:25:00.000-06:00

My historical tours in Butte always include geological background, including what, where, who, when, how, and how much. Among the most frequent questions from visitors is why—why did Butte (or any other big mining district) end up with so much copper and silver in a tight, 5-square-mile zone, and otherwise similar areas just a few miles away did not?

My answer always is, “If I knew that, I could win the Nobel Prize in Economic Geology.” Not that there is such a prize, but you get the idea. Geologists understand mineral deposits pretty thoroughly, up, down, sideways, and through time. But that ultimate question of “Why?” typically remains unclear.

The easy cop-out answer is something like, “Well, more copper (or whatever) than usual was scattered in the rocks, and when magmas rose (or some other kind of geologic event happened) the metals were mobilized and concentrated into veins because there were more fractures (or some other rock feature that focused the mineralizing fluids).”

That’s fine, but it’s almost entirely “how,” not “why.”

Why was there more tourmaline in western Turkey to put boron in hot water there, making Turkey the world leader in boron production? Why did a 45-million-year-old lake in southwestern Wyoming end up with enough highly concentrated sodium carbonate (a compound critical in glass making) to make that deposit the largest in the world? A good answer is challenging to find.

We’re not totally clueless, of course. Researchers study primary mechanisms like black smokers on the sea floor, possible fundamental sources of deep-earth elements like copper, lead, and zinc. Such processes may represent the earth’s first version of mineral concentration. Later events, reasonably well understood, may take those primordial deposits and convert them into exploitable economic deposits in the earth’s crust, near enough to the surface for miners to work today.

But “Why?” can be the hardest question to answer in geology, just as it may be in human affairs.

US oil imports from Saudi Arabia decline

2010-03-09T15:08:00.000-07:00

In recent years, Saudi Arabia has been in a near-tie with Mexico for the #2 spot as a source of US oil imports. Late last year, Saudi Arabia dropped to fifth place.

Good news, you say? Maybe. The forces moving oil around the world are complex, and in addition to recession-related decline in oil consumption in the US (mostly in diesel and jet fuel, not so much in gasoline), Saudi Arabia is shifting its market more toward China. This matters, because as exporters find markets willing to pay higher prices, those prices will increase in the United States as well, even if we are buying less. And as exporters begin to care less about the economic stability of their lower-demand customers, what the U.S. says about the question becomes increasingly irrelevant.

Believe it or not, Saudi Arabia has had a vested interest in keeping oil prices low enough to keep the economic engine of the U.S. purring. Gouging is not in their interest—contented, spending customers are. When other customers supply most of the money any exporter needs, those who are lower on the totem pole become second-rate, at least as far as price concerns go.

For the record, here are the top import sources for U.S. oil in November 2009:

Canada – 23% of imports
Mexico – 9.8%
Nigeria – 8.8%
Venezuela – 8%
Saudi Arabia – 7.7%

The next tier of import sources vary from month to month, but each of the following nations supplies the U.S. with about 3% to 4% of our oil imports: Angola, Iraq, Algeria, and Russia.

Virtually every drop of Canadian oil exported comes to the United States. So don’t think we can simply “get more” from Canada. There is no more to give, except as Canadian supplies slowly grow. With prices as low as they are ($78 or so per barrel), the Canadian Tar Sands are barely economic, or non-economic, to produce. Which means they are not produced.

Buy American!

2010-03-04T08:14:00.000-07:00

I love to read letters to the editor whose writers seem to believe that all our problems (or at least those of the auto industry) could be solved by Americans buying American cars.

I’m not going to get into the question of what’s an “American Car Company” – are Toyotas made in Tennessee American or Japanese? Does Daimler’s former ownership of Chrysler mean that they made foreign cars? Who owns Saab? I have no idea. I want to share some information about the sources of raw materials that make up the “American” car.

Iron to make steel – far and away the greatest proportion, by weight, of every U.S.-made car – comes from mines in Minnesota and Michigan. 240 pounds of aluminum comes from either recycling or imported ores and concentrates, because the U.S. has no domestic production of bauxite, the only ore of aluminum. Smaller in volume, other elements are nonetheless critical components of modern vehicles.

Copper – on average, a third imported from Chile, Canada, Peru.
Lead – probably mined in Missouri or Alaska
Zinc – mined in the U.S., refined overseas
Manganese – 100% imported from Gabon, South Africa, China
Chromium – mostly imported from South Africa, Kazakhstan
Nickel – mostly imported from Canada, Russia, Norway
Magnesium compounds and metal – from Canada, China, Russia
Sulfur – produced in 29 states and imported from Canada, Mexico, Venezuela
Silicon – half imported, 60% of that from China and Russia
Molybdenum – from U.S. mines in the Rocky Mountain States and Nevada
Vanadium – 100% imported from Czech Republic, South Africa, China
Platinum – 91% imported (South Africa, Germany)
Palladium – 72% (Russia, South Africa)
Antimony – 86% dependent (China)
Barium – 79% import reliance, almost all from China
Beryllium – from Utah
Cobalt – recycling (20%) and imports (80% - Norway, Russia, China)
Gallium – 99% dependent, from China, Ukraine, Germany
Gold – U.S. is a net exporter. Nevada is the leading producing state.
Neodymium – 100% dependent. China produces almost all in the world.
Tin - recycling (20%) and imports (80% - Peru, Bolivia, China)
Lithium – more than 50% imports, from Chile and Argentina
Vinyl plastic – made from natural gas (19% imported, mostly from Canada) and salt (17% imported, largely from Canada and Chile)

There’s more, but that’ll do for this post. Are you saying, “I really don’t care whether my car has neodymium and lithium or not.”? You should. As gasoline prices increase, those and other elements will become dramatically more important in electric batteries and in improving fuel efficiency. Do you like your car’s glossy paint? Barium from China contributes to that sheen. Platinum and palladium make your catalytic converter work.

What Things Are Made Of covers the geology behind China’s near-monopoly in rare-earth production (including neodymium) and Bolivia’s status as the future “Saudi Arabia of lithium.”

Buick photo in public domain, via Wikipedia

Analogs

2010-02-28T10:30:00.001-07:00

Geologists are all about analogs. Since we don’t have actual time machines, we have to look at modern situations to project into the past and determine what happened.

In a previous post I mentioned gypsum in Oklahoma, precipitating out of seawater on a hot, arid equatorial coastline 255 million years ago. A good modern analog for this is Umm Sa'id Sabkha, on the east coast of Qatar along the Persian Gulf (or Arabian Gulf if you prefer), in the photo below.

A sabkha (Arabic for salt flat) is a low-lying area occasionally inundated by marine water. When the water withdraws, mineral salts precipitate as the water evaporates. Sabkas are the basis for our understanding of how many ancient deposits of evaporite minerals formed, including salt (halite), gypsum (used in wallboard), and sylvite (a source of potash for fertilizer, mined in New Mexico and imported from Canada and Belarus).

Another analog: We’ve only known about black smokers (photo, left) since 1977. These hydrothermal vents on the abyssal sea floor spew superheated, metal-rich water into the ocean. Metal sulfides precipitate around the vents and provide a possible analog for ancient copper, lead, and zinc deposits exploited on land today. Deep mantle sources may be the origin of some metal concentrations in the crust.

Lots of mineral deposits can’t be explained by direct analogs—for example, we can’t really look at the roots of a modern volcano to observe the processes that may be concentrating ores there. But inferences from modern situations are probably the best way we have of understanding unusual mineral bodies and predicting where to find more.

“The present is the key to the past” – a concept first clearly expressed by Scottish geologist James Hutton in 1795 (but probably not in those exact words).

Images – Sabkha NASA, black smoker NOAA

Who’s got the oil in the US?

2010-02-23T19:28:00.000-07:00

Perhaps it’ll surprise you to learn that thirty-one states have at least a little oil production. That leaves 19 with none at all. In most states with no oil production, there’s also little or no oil potential, just because the rocks there lack the properties for generating and trapping oil.

From the list below of non-producing states, those with some potential include most of the southern Atlantic seaboard – Georgia, South Carolina, and North Carolina. Oil accumulations may exist in sedimentary troughs in those states, as well as offshore, but exploration to date is not encouraging, so we’d call the potential pretty low there.

Volcanic rocks cover much of Washington and Oregon. That doesn’t make oil pools impossible, but the likelihood declines greatly. Most of Minnesota and Wisconsin are underlain by ancient rocks, a billion years and more old, from a time when life was limited mostly to single-celled organisms. You need teeming life to make petroleum, and even though much oil derives from single-celled life like algae, the amount of life a billion years ago was not enough to make oil – or if it did, it has not survived collisions, subductions, and other traumas the earth has thrown at the older rocks of Wisconsin. The younger rocks there are relatively thin, another factor reducing the potential for commercial oil fields. You need to bury organic material deeply to naturally cook it into oil, but not so deep as to overcook it.

So 31 states are awash in oil, getting rich on production taxes and severance taxes. Well, not quite. Almost 80% of US oil production comes from just four states. For November 2009 (data from World Oil), the four leading states in descending order were Louisiana, Texas, Alaska, and California. The other 27 producing states together account for just over 22% of total US oil.

Here’s the list of 19 states with no oil production at all in November 2009:

Connecticut, Delaware, Georgia, Hawaii, Idaho, Iowa, Maine, Maryland, Massachusetts, Minnesota, New Hampshire, New Jersey, North Carolina, Oregon, Rhode Island, South Carolina, Vermont, Washington, and Wisconsin.

The map below, from the US Geological Survey, shows most of the wells in the US – more than 500,000 producing oil wells (over half the oil wells on earth), plus gas wells and dry holes. Some estimates figure three to five million wells have been drilled in the US in the search for oil and gas.

Cooking, cleaning, cooling

2010-02-20T08:42:00.000-07:00

Fluorine is another relatively obscure element, but one virtually every American has in his or her home.

Fluorine gas derives mostly from the mineral fluorite—a beautiful mineral, prized by collectors for its multicolored cubic crystals. The Cave-in-Rock District, along the Ohio River in southern Illinois, once produced most of the world’s fluorite (also known as fluorspar). Those mines are closed now, and the U.S. is dependent on imports for 100% of the fluorspar that we consume, amounting to more than 400,000 tons each year.

Where does it go? Most fluorine goes to make hydrofluoric acid, critical in aluminum and uranium processing. And hydrofluoric acid is the feedstock for all fluorine-bearing chemicals, and this is where fluorine ends up in homes.

Teflon in non-stick cookware and Freon in air-conditioning systems are brand names for fluorinated compounds. Then there’s fluoride in toothpaste and municipal water systems, not as a communist plot but to alleviate tooth decay because fluorine in the crystal structure of calcium phosphate (the mineral making bones and teeth) is stronger than otherwise.

Enamel coating your stove almost certainly contains fluorine. Glass and steel manufacture demand it, as does cement production.

Where does the U.S. get fluorspar? Most imports (52% in recent years) come from world production leader China. Another 34% is imported from Mexico, with South Africa a distant third as a U.S. fluorspar supplier.

Photo of fluorite from Cave-in-Rock by Richard Gibson

Disclosure

2010-02-16T12:36:00.000-07:00

This probably doesn’t apply to me, but just in case.

The Federal Trade Commission requires bloggers to disclose any freebies or promotions they get in connection with any products they discuss.

So:

No one gives me anything. Well, sometimes a friend of relative does, but I’m not endorsing them, either. I don’t get any kickbacks from the government of China for describing the Bayan Obo rare-earth deposit. Toyota isn’t breaking down my garage door to give me a Prius because I talk about the neodymium in its motor or the lithium in its battery. In case that should happen, I’ll be very happy to disclose the fact.

My goal is to be objective anyway, so if a company gave me a freebie, that wouldn’t guarantee much, anyhow.

Good enough?

Toast for breakfast

2010-02-13T13:25:00.000-07:00

How many nations do you depend on when you toast your morning bread?

My cheap $15 toaster’s case is mostly galvanized (zinc-coated) steel, with white exterior surfaces thanks to a thin enamel covering. Common traditional toasters, many still in service, are chrome-plated steel. The ends of mine are white plastic with red lettering.

The bread rack inside is also chrome- or nickel-plated steel, although in mine there’s also an aluminum support system. Stainless-steel (a chromium-iron alloy) screws and rivets hold the whole thing together. A nickel-chromium alloy, in strips wrapped around a mica sheet or mica-paper board, does the work. Nickel-chromium has high electrical resistance—it doesn’t conduct electricity well, so when a current flows through it, it gets hot.

Differential thermal conductivity comes into play again, in the thermostat, which may be a simple bi-metallic strip (usually steel and copper). The two metals heat up at different rates, forcing the strip to bend. This action in turn effectively flips a switch to turn off the heat and release the rack so it pops up.

The wire that leads to the electric outlet is copper, insulated by flexible plastic.

Some of the raw materials that make the toaster come from domestic mining, but the U.S. depends on imports for most of the materials.

Bauxite (aluminum ore) – 100% dependent (from Jamaica, Brazil, Guinea, and 5 others)
Nickel – recycling + imports = 72% (from Canada, Russia, Norway, and 18 other countries)
Chromium – recycling + imports = 100% (from South Africa, Kazakhstan, and 12 other countries)
Mica – 16% (from Canada, China, India)
Oil and refined products for plastics – 58% (Canada, Mexico, Venezuela, Saudi Arabia, and 64 other countries)
Titanium dioxide pigment – U.S. exports, but depends on 77% imports for titanium metal (South Africa, Australia)
Antimony (flame retardant in plastic) – 86% dependent (China)
Copper – 33% to 43% dependent (from Chile, Canada, Peru, and 12 others)
Zinc for galvanizing iron – 73% dependent for zinc metal (Canada, Mexico, Korea)
Iron ore – U.S. just about breaks even: a small exporter some years, a small importer in other years.

We’ll save the bread itself, together with the electricity to run the toaster, for future posts.

So how many countries in your toaster? Canada, India, South Africa, Russia, Norway, Mexico, Kazakhstan, Chile, China, Jamaica and the U.S. – eleven countries at a minimum.

Photo by Donovan Govan, used under the GNU Free Documentation License.

Consider the fork

2010-02-07T08:08:00.003-07:00

Perhaps your family heirloom cutlery is sterling silver (that is, 92.5% by weight silver and 7.5% copper), but most likely your “silverware” consists of stainless steel.

Stainless steel has been around for only about 100 years, although chromium’s corrosion resistance in iron alloys was known by the 1820s. In the 1910s metallurgists invented ways of reducing chromium’s carbon content to make commercial stainless steel possible. Chromium makes steel “stainless,” not literally true, but such alloys are far less likely to rust.

Chromium finds its greatest use in stainless steel alloys, but dinnerware represents a tiny portion of end use. Structural elements in cars, aircraft, and appliances, together with building construction, take huge volumes of stainless steel. Most stainless steel alloys contain 10% or more chromium, with iron proportions at 70% to 90%.

While iron and chromium dominate the chemistry of stainless steel, your knife or fork probably contains other metals that make the alloy more machinable, resistant to abrasion, or simply more shiny. Nickel, manganese, molybdenum, titanium, and aluminum all contribute desirable properties to stainless steel. Dinnerware alloys commonly contain nickel (10%) and chromium (18%) combined with iron (72%). Nickel makes the alloy stronger, and chromium increases hardness along with its corrosion resistance.

The U.S. has no primary chromite (iron-magnesium chromate, (Fe,Mg) Cr2O4, chromium’s principal ore) production from mines, but our import dependency is only 39% thanks to a remarkable 61% of supply generated by recycling. Imports come mainly from South Africa and Kazakhstan, which together with India produce three-quarters of the world’s chromium—one of few elements whose production isn’t dominated by China.

Chromium metal hit record prices in 2008, averaging $11,078 per ton. U.S chromium consumption is declining with the recession, but in 2008 we used more than 400,000 tons worth more than $1 billion. With prices like that, it’s no surprise that one chromite deposit about 10 miles south of Coos Bay, Oregon, is being evaluated and permitting is in the works. Additional chromite reserves exist in the 2.7-billion-year-old Stillwater Complex of south-central Montana.

My battle with “of”

2010-02-03T09:25:00.000-07:00

I think scientists generally put lots of “ofs” in their writing. At least I do. I know it, I hate it, and I still do it.

Combined with the discovery of the vast copper resources of Chile, this spelled the beginning of the demise of the copper business of the United States.

One of my first editors, my friend Sally Lawrence, read that line (and the plethora of other prepositions I had peppered my prose with) and wrote “Oh woe is me—prepositions are the downfall of many a good geologist.” I find now that I must force Word to highlight all my “ofs” so that I can ruthlessly, tediously reduce their number. I have trouble avoiding the word: I’m so accustomed to writing things like “the geology of Canada contributed to its position as one of the world’s leaders in production of mineral resources” – yikes! When I see that now, I really cringe! (But only when I’m on alert, in editor mode, and watching for such literary atrocities.)

But at least overuse of “of” can be repaired. Or maybe I should lose the “ofs” and say “I can overcome this problem.” Sometimes.

I’m prone to happily split an infinitive here and there, and I agree with Winston Churchill’s lines ending in prepositions, at least occasionally. And “of” is a useful and necessary word. I’m just trying aggressively to improve my writing by controlling its unchecked spread.

I hope you like the revised sentence about Chile’s copper. It may not be perfect, but at least it’s a little better, I think!

Combined with vast copper discoveries in Chile, decreased demand drove the U.S. copper industry into a long, generally downward spiral.

I live in a mining town

2010-01-31T08:44:00.007-07:00

I live in a mining town. In some ways, the mother of all mining towns—the richest hill on earth, literally, and the only mining camp in the United States that grew into a multi-ethnic metropolis, with close to 100,000 people ninety years ago. In Butte, Montana, gold drew them, silver kept them, and copper made them rich.

When I look out my kitchen window I see a little park, the site of a small mine that shut down in 1910. Its waste rock makes the walls of my basement. And I see a massive headframe, the surface expression of the Anselmo Mine, one that reached 4,301 feet deep and closed in 1959. I’ve met Ed Panisko, a gentle man and a tough miner, the previous resident of my house, who worked in the Anselmo.

What Things Are Made Of didn’t come about because of my living in Butte. It started when I lived in Golden, Colorado, and was mostly an intellectual outgrowth of the perpetual calendar, History of the Earth, created in 1994. But Butte and its people have absolutely fostered and stimulated my work on What Things Are Made Of—in many ways, the core concepts of that book are nowadays right outside my door and in the foreground of my mind as I live and write and walk Butte’s streets.

Mining towns are complex, because they draw a transient population that depends on the vagaries of the mining business. Mineral commodities depend on all the things that drive the world economy. Wars are good (more copper, more iron, more manganese). Housing booms are good (copper pipes for plumbing) and busts are not (less gypsum for sheetrock, less feldspar for toilets). New inventions that connect and help humans are good (copper wires for telephone lines, tungsten for incandescent light filaments, mercury for Dr. Rush’s Thunderclappers, neodymium for electric car batteries). And so go the fortunes of places like Butte or Chuquicamata or Almaden or Bayan Obo or Udachnaya.

Living in a historically vibrant mining town that today is part of the nation’s largest Superfund site (as well as the nation’s largest National Historic Landmark district) is a huge eye-opener for anyone who is conscious of both the needs for mineral resources and the damage their extraction can create. And, I hope, of the possible ways that damage can indeed be remediated. The Clark Fork Watershed Education Program exploits the historical needs, the damage, and the ongoing restoration, to foster understanding and stewardship in a complex environment. I’m quite proud to have an occasional small role in that organization’s outreach to thousands of K-12 students and teachers.

In Butte, I live at the corner of Quartz and Crystal Streets, a very cool spot for a geologist. That’s one of the aspects of Butte that contributes subliminally to What Things Are Made Of.

I’m a person who craves the frontier. I grew up at a time when the American frontier had evaporated: I tried California’s golden magnet, but the frontier was gone. Space might have worked, but I wasn’t able to be an astronaut. Butte’s history, its color, its intricate flavor, is my personal frontier now. It touches all I do.

Photos by Richard Gibson

The most valuable mineral commodity

2010-01-28T08:08:00.002-07:00

Before you read on, take a guess. What non-fuel mineral commodity adds up to the most valuable mineral industry in the United States? “Non-fuel mineral commodity” means minerals, metals, rocks, natural mineral-rich solutions, stuff taken from the earth other than oil, natural gas, and coal. And not water.

Here’s a hint: it’s not iron ore, not lead, not gold. It’s not silver, aluminum, or copper.

The most valuable mineral commodity was worth more than $13 billion in the U.S. in 2008, but its average price was just $8.98 for a ton. We used almost 1½ billion tons of this common stuff, and had to import a bit (just 2%) of what we used, mostly from Canada, Mexico, and the Bahamas.

Every state produces it, from more than 4,000 sites operated by more than 1,600 companies employing more than 80,000 workers. Texas, Pennsylvania, and Missouri are the top three producing states.

This most valuable material declined in use by a third from 2006 to 2009, a statistic that may suggest that its uses relate to factors affected by the recession. Indeed, the greatest use reported for the commodity is in construction, mostly road construction and repair. What is it? Crushed stone.

Perspective

2010-01-25T08:42:00.000-07:00

A 462,000-gallon oil spill such as the one near Port Arthur, Texas, in January 2010 is not a good thing. But it gives a good opportunity for some perspective.

462,000 gallons amounts to not quite one minute’s worth of oil consumption for the United States. As of October 2009, we used up (forever) 546,204 gallons every minute of every day (EIA data), and that's with US consumption down by 2 million barrels a day or so from 2007, thanks to the recession.

In terms of world oil consumption, this spill represents just over 11 seconds in the planet’s oil-guzzling day.

Where uranium comes from

2010-01-22T10:49:00.001-07:00

You all know what uranium is used for: nuclear weapons and nuclear power. Some volumetrically tiny but nonetheless important uses include x-ray generators, inertial guidance systems, glass coloring agents, and age-dating in geology.

The mystique of secrecy and national security surrounding uranium and its products might lead you to think the United States produces—and jealously guards—all that we need. Nope. Although the U.S. is the consumption leader, using 30% to 40% of world uranium in recent years, U.S. production totals only about 3% of world supply.

In 2008, 85% of U.S. uranium consumption was imported, an import dependency greater than that for oil.

Canada extracts the most uranium of any country, and has the greatest known reserves. Australia is second-place producer, with Kazakhstan, Niger, and Russia in a near-tie for third place. Kazakhstan is second in reserves. The U.S. imports uranium from Canada, Australia, Russia, Kazakhstan, Namibia, Uzbekistan, South Africa, and elsewhere.

Economic viability of uranium mines in the U.S. depends sensitively on the price. Wyoming and New Mexico together have some 700 million pounds of uranium reserves if the price is $50 per pound, but only around 175 million pounds at $30 per pound. In January 2010 the price was $44.50 per pound, but uranium prices from 2004 to 2007 fluctuated widely, from $15 to $138 per pound. Volatile prices are the bane of the mining industry, which requires long lead times, huge up-front investment, and complex infrastructure.

Nuclear power plant image from Wikipedia.

Big vs. Little

2010-01-19T11:56:00.000-07:00

When I talk to people about natural resources, whether copper or cobalt or indium, a common misconception is that such commodities are evenly distributed across the earth, and we just have to find them—a mineral version of “drill baby drill.”

Countries like the US, Russia, China, Canada, Brazil, and Australia are relatively rich in a wide variety of mineral resources for a simple reason: they’re big. Big enough to have a lot of geology, a lot of environments, a lot of situations where economic mineral deposits can accumulate.

Small countries just don’t have the geologic diversity to be rich in lots of minerals—but lucky geologic accidents do occur, sometimes making a small country the world leader in one or two commodities.

For example, Spain and Italy together account for two-thirds of the world’s reserve base of mercury. Spain’s mercury mines were among the oldest mines of any type in continual operation (since Roman times) when they ceased mining in 2003 because of decreasing demand for mercury. Pumice, a volcanic rock used in building-block construction, spews from volcanoes all over the world, but Greece produces more commercial pumice than any other nation. Finland produces more than a third of the world’s peat. The US imports nearly a million tons of peat annually for horticulture, but next-door Canada is the main supplier rather than Finland.

Botswana’s miners find more gem diamonds than miners elsewhere, at 25 million carats per year, but Russia is a close second with 23 million per year. Botswana and adjacent parts of southern Africa harbor a disproportionate number of kimberlite pipes, unusual igneous rocks that transport diamonds from depths of 150 to 200 km beneath the surface—depths where pressures are great enough to squeeze carbon into diamonds.

Boron—used in glass, ceramics, soap, detergent, bleach, enamel, and other everyday products—comes from many countries (and the US is a net exporter), but the world leader is Turkey. In western Turkey’s Menderes Massif unusual concentrations of tourmaline, a boron mineral that sometimes makes gemstones, give thermal waters their remarkable boron content. Recent faulting seems to provide pathways for the hot water, which serves as a geothermal resource as well as a reservoir for boron.

Gem tourmaline photo from Wikipedia under GNU Free Documentation License.

You've got gypsum!

2010-01-15T14:30:00.004-07:00

Virtually every home in America contains a great volume of one mineral: gypsum, the primary constituent of wallboard.

Gypsum (chemically, calcium sulfate) crystallizes from supersaturated sea or lake water when the water evaporates, much like common salt precipitates from such water. In the United States, Oklahoma is the leading producer of gypsum—nearly 3,500,000 tons of it, worth more than $26 million in 2007.

But wait, you say — Oklahoma is nowhere near an evaporating sea bed, or even a lake! True, but 255,000,000 years ago, Permian time, as dinosaurs were about to begin their long reign, western Oklahoma was indeed a shallow, restricted lagoon or arm of the sea, and the climate was arid along a shoreline not far from the equator. Evaporation happened.

In Oklahoma’s Blaine Formation four to six gypsum layers, each as much as 10 feet thick, separate thin red shale beds. Shale solidifies from mud, and its red color reflects exposure to the atmosphere as evaporation proceeded: the iron in the mud oxidized to hematite—red iron oxide, essentially rust.

In today’s arid Oklahoma, when groundwater dissolves ancient gypsum and re-deposits it, beautiful crystals form. Oklahoma’s official state crystal is selenite, a type of gypsum found most notably at Great Salt Plains State Park near Jet, a town in northwestern Oklahoma.

After Oklahoma, U.S. gypsum production leaders are Arkansas, Iowa, California, Nevada, Texas, Indiana, and Michigan. But our total, nearly 13 million tons a year, can’t satisfy U.S. wallboard demand. Imports, mostly from Canada, Mexico, and Spain, account for more than 25% of US gypsum consumption. As with so many minerals, China leads the world with gypsum production more than triple that of the United States.

Based on What Things Are Made Of, Chapter 1: All The Ships of the World.

Public domain gypsum image via Wikipedia.

About Oil

2010-01-13T12:15:00.001-07:00

The elephant in the room when it comes to resources is oil. What Things Are Made Of has a chapter on transportation, and oil is naturally a big part of it. The oil section of my web site has lots of statistics (if you type oil statistics into Google, I come up ahead of the Energy Information Administration!). Today I simply want to make a bullet list of a few interesting observations about oil. Data are from late 2009.

The US gets about half its oil and petroleum products imports from the Western Hemisphere. Canada is our #1 supplier.
In addition to crude oil at about 8.5 million barrels per day, the US imports about 1,000,000 barrels per day of gasoline (42 million gallons per day) and 2,000,000 barrels per day of other refined petroleum products such as diesel fuel.
Only 1.2 gallons per 44 gallons of product made from a 42-gallon barrel of crude oil goes to make chemical feedstocks for plastics, paint, synthetic rubber, and petrochemicals. That’s not quite 3%. (While there may be good reasons for using less plastic, saving enough oil to make the USA oil independent is not one of them.) There’s an internet message going around that says it takes 12 million barrels of oil per year to make all the plastic bags we use. Not true—79% of North American plastic grocery bags are made from natural gas, not oil. Even if it were true, 12 million barrels a year is only 14 hours of total U.S. oil consumption out of the entire year.
Platinum, palladium, the rare-earth elements lanthanum, neodymium, and praseodymium, an unusual clay mineral called halloysite, and natural and synthetic zeolites are among the mineral commodities needed in petroleum refining. America relies on imports for most of these materials: platinum from South Africa, palladium from Russia, rare earths from China. New Mexico supplies the greatest volume of natural zeolites, and one mine in Utah is the world’s largest known deposit of halloysite.
The Middle East has something like half to two-thirds of all the oil in the world. Why? It takes several pages in the book to explain in detail, but the simple answer is a series of lucky accidents of geology.

Enough for now—but oil will return to the blog in the future!
Public domain pumpjack image via Wikipedia.

Mineral commodities: more information

2010-01-10T09:07:00.000-07:00

If you find the topics in this blog interesting, I’d also refer you to two important resources. Earth Magazine (formerly Geotimes) is a publication of the American Geological Institute. Although it is a trade magazine aimed at geoscientists, its articles are highly readable and informative. There’s a feature called “Mineral Resource of the Month” usually written by mineral commodity specialists with the U.S. Geological Survey.

To go straight to the source—where I get the figures that let me say we import this much of that mineral from China or wherever—visit the USGS Mineral Commodities Summaries pages. The data there serve as starting points for What Things Are Made Of. Then I explore questions like “Why does China have such large rare-earth deposits?” or “How did Missouri’s lead ore form?” and “What was the connection between the alum trade and the Pazzi Conspiracy in Renaissance Italy?”

My goal with What Things Are Made Of is to connect the chromium in your stainless-steel fork to its geological origins, its role in history, and its place in a complex, global network of interdependent producers and consumers. And to try to do that for hundreds of things around us every day.

The Latest Thing

2010-01-07T08:58:00.001-07:00

I monitor various news, geology, and materials sources for hot topics to include in What Things Are Made Of. My latest discovery is a wonderful compound, copper indium gallium diselenide, with the unfortunate acronym CIGS.

Indium, gallium, and selenium often combine to generate light when electricity flows through them—variations on that list, often including arsenic, power lots of LEDs (light-emitting diodes) in all sorts of products from hand-held calculators to traffic signal lights.

Dow Chemical in Midland, Michigan, announced their brand of CIGS solar panels last October. They aren’t your traditional solar panels—these are thin films encased in plastic that can be embedded in asphalt shingles. Roofing contractors can install them—no need for specialized solar technicians. No offense to solar technicians, but this should make the panels cheaper to install. Dow hasn’t said what they’ll cost, but they should be on the market by mid-2010.

Indium forms few minerals, and most indium is a byproduct of zinc smelting. Indium supply follows the ups and downs of the zinc industry, which in turn depends largely on large-scale steel galvanizing. Industrialization in China and India, calling for more and more galvanized (zinc-coated) steel communication towers and highway barrier systems, isn’t the controlling factor behind zinc consumption, but it is an important aspect of it.

China leads the world in indium production, and also leads in supplying imports to the United States which is 100% dependent on foreign sources for indium. Likewise, virtually all gallium used in the U.S. is imported, in almost equal proportions from China, Ukraine, Germany, and Canada. Processing bauxite to produce aluminum yields most of the world’s gallium. Selenium is also a byproduct, usually of copper refining. One refinery, ASARCO’s 11-acre building near Amarillo, Texas, produces all primary domestic selenium, but the U.S. also imports nearly 600 tons per year, mostly from copper refineries in Belgium.

Some estimates suggest that indium demand could increase ten-fold over the next five years because of increased CIGS solar panel usage. If that happens, look to China for supplies—China produces 58% of the world’s indium, far ahead of #2 Japan (11%). You don’t care about solar cells? How about your flat-panel TV, computer screen, iPod, and other display devices? They all require indium.

Flat-panel image from Wikipedia, under GNU Free Documentation License.

Yes, we have no aluminum (ore)

2010-01-04T08:19:00.005-07:00

A friend questioned the quiz answer indicating that the U.S. is 100% dependent on imports for bauxite (photo, right), the only ore of aluminum. He knew that lots of minerals contain aluminum—it’s the third most abundant element in the earth’s crust, after oxygen and silicon. And the rock-forming minerals that contain aluminum are common, ranging from feldspars in granite to clays in fine-grained shale.

So why can’t the U.S. use those aluminum sources, rather than relying 100% on bauxite imports from Jamaica, Guinea, Brazil, Guyana, China, Sierra Leone, and Greece? The simple answer: It’s far too energy-demanding to get the aluminum out of any rock other than bauxite.

Despite aluminum’s abundance, aluminum metal was not isolated until 1825, by Danish chemist Hans Christian Oersted—the discoverer of the close relationship between electricity and magnetic fields. It was an electric current that allowed Oersted to produce impure metallic aluminum, but aluminum remained a rare and expensive curiosity for 60 years.

Charles Hall, a student at Oberlin College (Ohio) devised the first relatively cheap electrolytic aluminum manufacturing process in 1886—and the Aluminum Company of America treasured as “crown jewels” the small metal buttons Hall made.

Aluminum is bound tightly, usually with silicon, in common minerals. Only a few minerals lend themselves to the electrical disruption needed to free aluminum metal from the crystal lattices. Three aluminum hydroxide minerals, gibbsite, boehmite, and diaspore, are in that category, and they are the primary components of the rock bauxite. Bauxite forms by intense chemical weathering of aluminous minerals like feldspar in granite—in fact, Mother Nature does most of the work of producing aluminum, rearranging aluminum atoms to make bauxite’s hydroxides. Metallurgists seeking pure aluminum can process bauxite cheaply, while the aluminum in more common compounds like feldspar and clay is impossible to remove commercially.

In the United States, the only significant bauxite formed 90 million years ago in what is now Arkansas. Those deposits served as important ore sources from 1899 until competition from cheaper foreign markets and recycling ended production in 1990. The U.S. has no primary bauxite production today.

No bauxite doesn’t mean we don’t produce a lot of aluminum. With 30% recycling, together with processed imports, the United States in 2008 was a net aluminum exporter—a dramatic change from 2005 when metallic aluminum was imported (more than 40% of domestic consumption) along with 100% imported bauxite. U.S. aluminum smelters employ 55,000 workers in an industry whose metal production earns $7.9 billion each year.

As Jules Verne wrote, “Aluminum was once a precious metal.” Precious enough to cap the pyramid atop the Washington Monument in 1884, when aluminum’s price was $1 per ounce, the same as silver—at a time when a dollar bought nearly 500 pounds of coal, 150 bricks, or 15 pounds of flour.

Adapted and expanded from What Things Are Made Of, Chapter 4: You Are What You Eat. Bauxite image above from USGS via Wikipedia.

American dependency on natural resources

2010-01-01T09:51:00.001-07:00

Many people I talk to have the mistaken impression that the United States is not only self-sufficient in most resources (with the generally known exception of oil), but that we are also the world’s 600-pound gorilla when it comes to most of the important natural resources we use. Not so.

In the list below, I’m focusing only on some of the main mineral resources, things that are familiar to most people. For each commodity, I’m providing the world production leader (in some cases, a very close #2 is also given) with the percentage of world mine or factory production that nation contributes, using 2008 figures from the US Geological Survey. U.S. percentage and world rank is given for comparison. For most of these resources, the U.S. consumes far more than it produces.

Aluminum (smelter): China (33%). US= 7%, #4
Cement (plant): China (50%). US= 3%, #3
Copper: Chile (35%). US= 8%, #2
Gold: China (13%). US= 10%, #3
Iron Ore: China (35%). US= 2%, #7
Raw Steel (foundry): China (38%). US= 7%, #5
Lead: China (40%). US= 12%, #3
Manganese: South Africa (21%), China (20%). US= none
Molybdenum: USA (29%, #1), China (28%)
Nickel: Russia (17%). US= none
Silver: Peru (17%). US= 5%, #7
Sulfur: USA (13%, #1)
Tin: China (45%). US= none
Tungsten: China (75%). US= est. 1%, est. #14
Zinc: China (28%). US= 7%, #4

My point is simple: Isolationist attitudes about natural resources are untenable. Modern society, especially in the United States, relies on a thoroughly globalized interdependency—whether we like it or not.

Who cares about neodymium?

2009-12-29T08:27:00.002-07:00

You should. It’s in your CDs and CD player, computer hard drive, TV tube, sunglasses, and cigarette lighter flints. It helps lasers speed communications through fiber optic networks. Neodymium magnets are critical for MRI scanning devices. Loudspeakers, headphones, guitar pick-ups, model airplanes, welder’s goggles all have some. Geologists and astronomers use neodymium and its isotopes to understand the universe around us. But as Americans become more concerned about the price of gasoline and its availability, it is in electric car motors that neodymium makes news.

A typical Prius contains two pounds of neodymium, mostly in magnets that help drive the motor. Where does it come from? Virtually all the world’s neodymium comes from one location: the Bayan Obo Mine in northern China. You can see the mine in Google Earth by searching on "Bayan Obo, Baotou, Inner Mongolia, China"—the mine is north of the city. China’s virtual monopoly—and trust me, they know what they have—on this and other rare-earth elements has some car makers worried, enough so that they’re exploring arrangements with Viet Nam and other nations that have smaller, undeveloped supplies of these critical elements.

The U.S. was once the largest producer of rare-earth elements, mostly from one mine in California’s Mojave Desert. But China’s vast reserves catapulted it into first place in 1992, and pretty much put that mine out of business in the late 1990s. The U.S. has had no primary mine production of rare earths since 2002, and imports, 87% from China, account for all our consumption today. The mine at Mountain Pass is mothballed, but prices and worries about supply are encouraging the owners to explore the idea of re-opening it.

Accidental disoveries

2009-12-26T09:49:00.006-07:00

As a scientist, I appreciate the role of serendipity in discovery, whether in finding an oil field or uncovering the properties of strange compounds and elements. One of the most enjoyable aspects of writing What Things Are Made Of was learning about some of the interconnections that led to unexpected modern uses for chemicals.

The element selenium’s photoelectric properties were discovered accidentally by a researcher attempting to improve the electrical conductivity of undersea cables. Englishman Willoughby Smith worked for the Gutta Percha Company—named for the natural rubbery substance used to coat cables—and oversaw cable laying across oceans from the Mediterranean to the North Atlantic. Shortly after working on the first cable connection from Java to Darwin, Australia, Smith moved from management to his first love, technical engineering problems. Testing selenium showed it to have erratic properties, unsuitable for his needs. But Smith’s curiosity led to a critical discovery in 1873.

Quote from the book:

Not one to simply cast the selenium aside, Willoughby Smith investigated further – and discovered that the metal’s electrical resistance was proportional to the strength of light falling on a selenium bar.

Selenium is usually a byproduct of copper refining. Consequently, Belgium, with major refining facilities, is the primary source of selenium imports to the U.S., and imports accounted for a third or more of our consumption in the late 1990s (recent figures are not available because there is only one domestic producer, and the data are withheld to avoid disclosing proprietary company information).

Selenium decolorizes glass, gives ruby-red color to plastics, coats photocopier drums, works in electric-eye doors, is a livestock feed supplement, and helps solar cells and anti-dandruff shampoos do their jobs.

Thoughts on self-publishing

2009-12-22T16:42:00.008-07:00

When I read these days about self-publishing, I have to smile. So many choices – print-on-demand, publish to the web, hire a publisher (which can range from a real vanity press to a clandestine vanity press to some version of “real” publisher).

Way back in the before time, 1994, when I self-published the History of the Earth Perpetual Calendar, I don’t think I even had reliable e-mail, much less 45,300,000 Google hits for the topic of self-publishing. To me, self-publishing meant that I would write it, get the illustrations, do the layout, then somehow get all that to a printer who would print and bind the thing and give it back to me, and then I’d sell them all and retire.

Right. That was all correct except the part about selling them all and retiring.

The biggest challenge, apart from finding money to pay the printer (thanks Mom and Dad), came when I got the 54 cases of books home – four trips in my pick-up to get all 2000 of them. It had been easy to decide to go to a press run of 2000 instead of my initial plan of 1000. One thousand would have cost about $10,000, but 2000 was only $2,000 more. A no-brainer.

After sorting out some issues with the printer (the book is laid out with one page per date in the year, and I might have thought that anyone would know that March 27 is NOT followed by April 6, but no) I had the books. For 16 years now, the boxes and boxes of books have supported a platform for my spare bed—comfortable enough, by most accounts. Even after selling 1,620—which, Google now can tell me, is a pretty decent record for a truly self-published, self-marketed, and self-distributed volume—I still have enough to hold up the mattress, although some of the boxes are empty and in danger of collapse. But then, I don’t get as many visitors to Butte as I did when I lived in Golden, Colorado.

Distribution and sales improved when the Internet arrived and I created my web site in 1997. Ten or twenty sales a month, with the occasional purchase of 10 or even 36 at a whack. A nice mention in the now-defunct Earth magazine helped tremendously, with about 150 sold in a two-month period.

The world of publishing has evolved, no doubt about it. We’ll see what changes are wrought by kindles and nooks and other technologic advances. As for me, I’m really quite happy with my experience as a “traditional” (old-time) self-publisher—and ready to move into whatever realms appear as I try to get What Things Are Made Of published, this time by someone—anyone—else.

Additional interesting takes on self-publishing at Nathan Bransford's blog.

Answer to Dec. 18 Quiz: Of gold, bauxite (aluminum ore), nickel, and tungsten, the U.S. is a net exporter of just one: gold.

About the book

2009-12-18T08:28:00.002-07:00

What does an emery board’s rough surface tell us about Africa’s million-years-long collision with Europe? Should an angler worry about the source of the platinum he or she relies on in casting a nylon line? What ancient life form gives us filters for beer? How much of an "American" car is built using minerals imported from elsewhere?

These are the kinds of questions addressed in What Things Are Made Of.

Quote from the book:

Contrast media in medical diagnostic imaging contain as much as 60% iodine, familiar as a disinfectant. Chile’s northern deserts harbor nitrate-rich deposits that also rank as the world’s largest supplies of iodine, even though only about 0.05% of the ore is calcium iodate, Ca(IO3)2.

Fact: In 2005, the U.S. imported 72% of the iodine it consumed.

Quiz: Which of the following do you think the U.S. is self-sufficient in (that is, the U.S. is a net exporter)? Gold, bauxite (aluminum ore), nickel, tungsten. Answer next time!